S-10CREWCAB.NET

jajwrigh

I am in the process of replacing pads, rotors, and greasing caliper slide pins. What fits the nut in the center of the rotor?? I have bought large sockets and wrenches and nothing works! What size is it and what tool will remove it the easiest? Please help me guys, I am loosing my mind.

jajwrigh

I don't know what you are talking about. If I posted something there, it must have been a long time ago and now I don't remember. Could you reply here as well? I really need help and you are the only one to respond. Thanks.

jajwrigh

3 year/36,000mile....gone!

jajwrigh

Last fall I was cruising along at highway speeds and this horribly loud noise started coming from my front axle on the passenger side. It was to the point where I couldn't hear myself stop. My light showed I was in 2 wheel drive, but I have reason to believe the truck was trying to go into 4 wheel d...

jajwrigh

This started last winter, but now is the time to get things fixed before this winter arrives. The driver's side heated seat doesn't work, but the passenger does. I checked the fuse and it is obviously fine, because on the seats does work. Is there something that could have come unplugged under the s...

jajwrigh

I did 20% on the front and it is a pretty even match with the rest of the vehicle. (factory tinted glass)

jajwrigh

A helms manual would be much more useful for you. They are quite expensive, but you can do all of your own work with one.....with the exception of tranny work. If you want to price one goto www.helminc.com

jajwrigh

Well I ordered me up a set from Summit last night- $49 ea top, $42 bot. Tried to order online but the only bottom ball joints it would list for it were 83-94. Gave up online and did it the old- fashioned way :idea: Nice to know I'm getting the right parts. I just ordered them as well and had the sa...

jajwrigh

So are you saying once I get the balljoints replaced and crank the tbar and actual get the front to sit even, it will be different under the truck?

jajwrigh

I was denied an alignment today because the shop said my lower ball joints were loose. Damn GM for taking so many shortcuts. You shouldn't be replacing anything on a vehicle with 27k miles!! My hondas never had any problems and I drove them hard. It looks like Moog will get my business Monday. I wan...

jajwrigh

The passenger side is way in and the driver the opposite....I am going to the shop now I hope they can figure it out.

jajwrigh

I spent the last few hours trying to get the front wheels even...not even close!! I tried the tb crank with only the front of the truck on jackstands, and I tried with it setting on the ground. The driver's side is always higher no matter what I do. I think something is wrong with the passenger side...

jajwrigh

I have a 2.5 mile drive to the alignment shop tommorrow....will I make it safely after I crank? I hope so...

jajwrigh

The moogs will run 180 - 200 dollars for two new uppers and lowers. I haven't a clue with the OEM parts. Why buy more of a part that will need to be replaced again? I am pretty sure that I read that Moog has a lifetime warranty too. In my eyes that is hard to beat...

jajwrigh

Summit sells the moog parts. I plan on replacing my upper and lower ball joints with their products. I post a review when I finish...

jajwrigh

I have notice a loud "chatter" in my front left tire area. It happens only when I go over bumps. Could this be ball joint failure? I want to know who makes aftermarket uppers and lowers. Looks like its time to order a Helms manual...

jajwrigh

Which inlet/outlet configuration do we need? The flowmasters come in so many different configs!! Offset left in middle out, middle in and middle out, etc... let me know!!

jajwrigh

How difficult are the pulleys to install? Do the gains seem worth the time?

jajwrigh

Finally that damn heat is gone!!! This fix is great and only took 15 seconds to do!! I used a small bolt and the vacuum helps keep a very tight seal. Good info, thanks guys!!

jajwrigh

Ranchos stiff?? Hardly...if people think they are too stiff they need to try Koni yellows on the highest setting. There is no comparison there! These were in my old civic with Nuespeed race springs....almost too stiff for a daily driver. Girls hated how it rode, but it handled really well!!

jajwrigh

Good info thanks HJ...

jajwrigh

I think I should do a mild TB crank to level out the front of my truck a bit. How soon afterwards would I have to do an alignment? I am looking for an inch to an inch and a half. One more question.....does the truck have to be off the ground to crank the TB or not? Let me know what you guys think......

jajwrigh

You can put shackles in the front?!?

jajwrigh

Will these two mods work against each other in any way?

jajwrigh

I just got mine on an hour and a half ago too! Nice improvement over stock...rides more like a truck now. Install was a breeze!!!! The hardest part was getting the dust cover things on the shocks. The driving experience is smoother now and more controlled. This is a must for anyone with stock shocks...

jajwrigh

I wasn't aware Remington made tires....hmmm

jajwrigh

I am expecting mine any day now as well!! Let me know how you like them. I also ordered from truck add-ons...

jajwrigh

Welcome to the site! Crew Cabs seem to be on the "endangered" list...so its nice to see another!!

jajwrigh

I just ordered the ranchos and daystar shackles!! I hope to have a better setup by the end of the week. I have 2 blown shocks for sure and the ride is sloppy at times...the joys of modding!

jajwrigh

Thanks guys i believe i have the tools and assembly abilty for the 2" BL. Heres my plan A: In a matter of minutes i will order the Boise AAL.When I recieve that I will also do the tb crank. B: 30-9.5-15 tires on my stock rims. In a month C: 2" BL .....fall of '05 Mark That is the identical plan tha...

jajwrigh

I'll pass....

jajwrigh

Good to know ....thanks man!

jajwrigh

I was looking at a set of these in a 30" size.

Anyone running these? Tell me what you think about them!

jajwrigh

Henry J-

Can this kit still be ordered??

jajwrigh

After reading this site for awhie, I have decided to get lifted! I think that I will go with the 2" bl for starters and then with a bds or superlift kit. I do have some questions though. Will this look ok with 29s or 30s? How do I know the backspacing that I need? What is this t-bar mod I always rea...

jajwrigh

What brand of 2" bl do you guys have and what did they cost you?

jajwrigh

I was curious to know distance....

jajwrigh

What is the most you guys have gotten on a full tank?

jajwrigh

Anyone know?

jajwrigh

Ok this is where things get really wierd! After my last post last night I haven't even gone outside until this morning. Now when I drive everything works like normal!?! This doesn't make any sense to me at all, but at least the guage is working now. I gather that this must be an electrical gauge rat...

jajwrigh

So for the guage to work for a few seconds and then drop all the way down is related to what? A loose sensor maybe? Anyone know where in the engine compartment I would look for this sensor?

jajwrigh

I just installed my CFM throttle blade and slightly adjusted the idle screw. I lowered it a few hundred rpms....any ideas?

jajwrigh

Did I leave something unplugged or what?? Any help appreciated...

jajwrigh

Will moving from the stock tire size to a 225/60/15 really make a difference in acceleration? If so why is this the case?

jajwrigh

I run the 180 stat, with the dex coolant, and 1 bottle of water wetter. I notice it runs a little warmer with the air on, but it usually stays about 180 - 200 degrees.

jajwrigh

Everything I have listed is now installed. Things went pretty well except for the few hoses and sensors I forgot to reattach....The is a stronger mid-range pull and it definately runs a lot cooler! No more ungodly hot air pouring in!! I realized that installing headers will be next to impossible so ...

jajwrigh

Well I will let you all know how it goes...

jajwrigh

I recently traded my '03 4cy/spd S10 in for a '04 Zr5. There is a lot more power in this engine, probably because it is twice the size. Anyway I daily drive this vehicle and plan on using it for the outdoors, as well as towing a boat at some point. So far I have added an Air raid intake and I just o...

jajwrigh

I have a 2004 Zr5....

jajwrigh

I had one with my old 2.2l and didn't notice much at all...

S-10CREWCAB.NET

Search found 50 matches

How do I remove the front rotors?

Somethings wrong with my front axle/4x4

Driver side heated seat quit working

Muffler question

March pulleys

New shocks, new shackles....time for TB crank?

Leaf spring helper and shackles

Goodyear MTRs

Boise Spring Works Kit

Going up!

Brand/ Price of 2" bl

Gas mileage record

Where to buy 4.10s?

My temp gauge stopped working!

A question on tire sizing/gear ratios

My horsepower plans

How can I find out what gear ratio I have?