S-10CREWCAB.NET

SONOMA915

I traded the CC for a 2005 Ext. Cab Toyota Tacoma. Please check the classifieds for some items!! Everyone here has been awesome!! I hope I can still come in from time to time.

SONOMA915

What model JL is that?

SONOMA915

Does anyone have the part number for a good aftermarket cap and rotor, I tried looking at Summit and couldnt get there site to work. I have an 04 CC with a 4.3L motor. Thanks

SONOMA915

I am attempting to swap my front end (Sonoma) to an S-10 front end due to the unavailibility of projector light for the Sonoma. Can you guys with S-10 front bumper give me a list of parts? I.E. Front Bumper, Bumper Mounts, Lower Valence for 4WD.... All help will be greatly apprieciated and when the ...

SONOMA915

Welcome!!!

SONOMA915

I agree with HJ, sounds like the cat is busted, it should be covered by an 8yr 80,000 mile federal emissions warranty. Your dealer will replace it under that warranty.

SONOMA915

I noticed a rattling noise at start up the other day and when I opened the hood, I found the sattle bracket bolt loose. I remember putting it on as tight as it would go, so I guess I saying thanks in a round about way.

SONOMA915

You could get a bolt. 2 washers and a nut and it should never fall off again.

SONOMA915

I saw it, that is crazy. One of the judges called him the king of college drinking games, I thought that was pretty funny!!!

SONOMA915

Man Jeff now you have me looking as Nissans. I will have to wait a year or two though!!!

SONOMA915

Okay thanks, Im sure they will be okay. Dont sweat it.

SONOMA915

With my spacers that I sold to Sonoma915 (I think :lol:) One had a slight wobble to it. It was somewhat noticeable at 30 MPH. I used it like that for several months, and it had no effect on the tire (BFG ATKO) at all. No balance issues--nothing. Maybe Sonoma915 can let us know his experience and if...

SONOMA915

Lookin Sweet!!!

SONOMA915

That is lookin pretty sweet!!!

SONOMA915

Well I'm out of suggestions, Maybe HJ has some??? Sorry I cant be more helpful.

SONOMA915

Are you doing it by hand or with a compressor?? Let the spring up so it puts tension on the top. Just a suggestion.

SONOMA915

I have an article in one of my truckin magazines about a Cavalier with a 502 c.i. big block in it. That would be an awesome mod!!!

SONOMA915

There may be a special tool available to hold the strut while turning the nut. Look at the top of the strut where the nut is, there may be a torx or some other way to counter hold it on the strut itself. Usually when I do a strut I use an O2 sensor wrench. It depends on the size of the nut that you ...

SONOMA915

How about a cold air intake and exhaust?? Supercharger?? HPP3?? Like HJ said, color match the mirrors and maybe even the door handles.

SONOMA915

Hey Brule, is Diversified Creations on the internet? Do they have any pics?

SONOMA915

Bubaloo has an SFA swap, doesnt he? I think he swapped out his super lift.

SONOMA915

I had a problem when I bought something from someone on E-Bay. I filed a complaint and the people at E-Bay contacted him, it took almost a month but I got my items. Just an enncouragment for you. Now I will not buy anything unless the seller has good feedback. Take it as a lesson learned.

SONOMA915

Take some pics of those door handles, I have been thinking about getting them.

SONOMA915

Those are the numbers I have on my truck.

SONOMA915

Its $2.85 here for regular. I think I'm gonna hold off on the lift for a long while if it goes higher.

SONOMA915

Why dont you do a R-134A conversion?

SONOMA915

Lucky!!! Man talk about stumbling onto it. Oh yea I got the spacers thanks wamason!! Good luck!!!

SONOMA915

Got everything in and working, the only thing I dont understand in the range. I filled up the tank and it said I had like 340 miles, I know that isnt right. I have reset the other things, just cant figure out the range. Any suggestions? Is everyone else experiencing this?

SONOMA915

Thanks again HJ!!!

SONOMA915

Split topic-HJ

Installed the overhead console last night, all in all took about four hours. I trasfered my map lights, due to my repacements being worn. So far things are looking good. Anyone know how to program the garage door opener?

SONOMA915

I thought so. Thanks.

SONOMA915

I recieved my console and harness today. It came out of a 2000 Blazer with On Star. Do I Have to drop the whole headliner or just the front to install the harness?

SONOMA915

Welcome!!!!!!!!

SONOMA915

Will do. If anyone else is looking to do this I would check S-10 Warehouse, they had about four up for auction.

SONOMA915

I won my ebay auction from S-10WAREHOUSE. All together it was about $64.00, including the harness and shipping.

SONOMA915

Thanks man, I didnt want to have to go and hunt you down. J/K

SONOMA915

Thanks, I will be doing this mod pending the end of the item I'm bidding on.

SONOMA915

Hey HJ, can you post some pics of how to remove the overhead console? If not can you give the location of the bolt/screws that hold it up? Thanks.

SONOMA915

Just roll a window down, ock the truck with the remote and manually unlock and open the drivers door. I think they work off of the dome light signal. I will try tonight.

SONOMA915

Darkons generate negative sounds, thats why we turn off the lights at night when going to sleep, it is more restful to us. Photons create positive sounds thats why we wake up in the morning when the photons start exciting the birds and causing sounds like garbage trucks on our streets that are neve...

SONOMA915

I would check the trans fluid, I had a the RPM hunt a couple times in overdrive. The trans fluid was low. My power steering did the same thing your talking about, I noticed I could give it a little gas and it would turn fine. It was the power steering pump. Replaced under warranty. Hope this helps.

SONOMA915

That is fricken hilarious!!!

SONOMA915

Welcome Gen1!!!!!!!!!

SONOMA915

Time is something I dont have due to planning a wedding for June. Maybe after everythig settled down I will do it myself. I'll post my conclusions about the intake and spacer.

SONOMA915

That is some crazy mark up on those pads!!! Forget the rop just send him a bullet.

SONOMA915

I will try it and post my results. I plan on doing a BL, but not until later in the year. I did find a place that will charge me $450 for a BL installed, not sure if I want to attempt this at home.

SONOMA915

I have a buddy that races, he is also sponsered by K&N. He said he could get me a full intake for $185. I may try to get that also, even though I'm pretty sure that they will not work together.

SONOMA915

I called Poweraid this morning and they are going to send me a hardware kit for FREE!! They are a pretty awesome company. I am getting mine so that it will be easier to change t-stats.

SONOMA915

I only paid $33.00. I saw them listed in Summit for $119. I figure I can find the other bolts and still come out on top. Thanks for the link.

SONOMA915

Can someone copy and send some instructions for the parts and installation for this throttle body spacer. I bought one on ebay and I think it is missing some parts. All I recieved was the aluminum spacers (2) and the throttle body spacer. Please PM me if you can help me. Thanks.

SONOMA915

malkavian wrote:I went and bought some hose the same diameter as the stock on and ran it from the rear diff all the way up between the cab and the bed.

Watch out for rain water getting in the diff, there is a tech bulliten about that.

SONOMA915

Oh, I work at a VW dealer as a tech!! Let me know if you guys need some help.

SONOMA915

I used a heat gun, plastic wedges and some patience. It took a while, but the result was good. http://www.s-10crewcab.com/coppermine/albums/userpics/10125/normal_P1280090.JPG This mod is not legal in my state, but the police dont care. So I must use the FOR OFF ROAD USE ONLY disclaimer!!! :lol:

SONOMA915

wamason wrote:Hmmm.....I'll have to remember to make a loop around the outside of the highschool football field before going home

I'll have to wait till they lift the water restrictions. Hasn't rained here in like 4 months.

SONOMA915

Maybe you could fit one in the storage compartments in the back? I dont have a blazer, but that would be the most logical spot. You could also get an outside mount like HJ's and put a battery where the spare goes, I would also use a heavy duty battery box.

SONOMA915

Its not exact, but our yellow is a hard color to match. My painted tail lights took two times to get the color close. It still looks good!!! Now you can focus on your fender flares!!!

SONOMA915

How long do you plan to keep the truck? A valid point that I should have mentioned http://www.crackmanworld.com/inc/libs/editor_files/images/smileys/smiley9.gif Wouldn't it help on the resale value a little? It sounds better to me when someone says things like, just serviced & new shocks. IMO Altho...

SONOMA915

As Taken for the sight listed above: Color Description Color Code Pewter Metallic Clearcoat 11/WA382E Space Blue Metallic Clearcoat 23/WA413G Indigo Metallic Clearcoat 39/WA9792 Black Clearcoat 41/WA8555 Medium Red Metallic Clearcoat 44/WA408G Medium Sage Green Pri Metallic Clearcoat 45/WA605H Whit...

SONOMA915

I think that you have had your OEM shocks on so long, anything but OEM wiil feel like an improvment! I changed mine at 35K and could tell the difference instantly.

SONOMA915

Thanks Guys!!

SONOMA915

I am pretty sure we all use the same fenders, it would have cost GM to make different fenders. IMO

SONOMA915

When I diagnose wheel bearings, I find an empty parking lot or a safe strech of road, go about 40 mph and turn to the left or right like making a fast lane chenge. If the noise changes then you just need to find out which side is faulty. You can also use chassis ears, but the top method works for me...

SONOMA915

Hey high-voltage, I had a problem with my light. The little guide tabs that hold the bottom of the headlight in weren't lined up correctly. It was a mo-fo, but with patience it went right in. Try to check that. There might be a little play if you push the headlight. Hope this helps.

SONOMA915

Only one word describes that, WOW!!!!!!

SONOMA915

I havent heard of them, have you tried a google search? Sometimes you can find great deals there.

SONOMA915

Does anyone know what sixe the front and rear speakers are for our crews? Thanks.

SONOMA915

Welcome Blackmobile!!! I bought a warranty from the dealer I work for. It is a Continuis Customer Care Platinum warranty with $0 deductible 6yr/100000mile for $1285. Its even better cuz I get to do the work. Of course I will have extra parts for after the warranty runs out.

SONOMA915

Hey Justin, how thick are those skid plates? Will they work if I get a body lift?

SONOMA915

One last question about this thread. Do you guys think I can run the 31's without a body lift?

SONOMA915

I was only playing. Alot of the cars I work on are fly by wire, the only draw back is that when the throttle body takes a dump you have no control over the accelerator. Its always nice to have the cable as a back-up.

SONOMA915

Got my truck back today from the dealer :bounce: Replace Encoder Mod---------------------------- $577.50 Replace Gasket, Cover Kit, Coolant-------------$678.16 Total------------------------------------------------$1,255.00 Steve Pays-----------------------------------------$100.00 Millennium Pays--...

SONOMA915

You could always carry a brick for the accelerator pedal!!!

SONOMA915

S10CREW01 wrote:Great JOB... Thinking of doing that myself and the 3rd break light. I will post once I get're done

I had a sticker cut to match my tails, I will try to get a pic tomorrow. It doesnt look as good as the tails because of the screw holes.

SONOMA915

ZIGGY K wrote:sonoma 915 ,were did you buy those taillights ?

They are APC clear lights that I painted. The lights didnt cost me anything, cuz a friend of mine was going to throw them away.

SONOMA915

wamason wrote:ES9000's kept me from destroying anything when my truck went airborne a few times a while back

I didnt buy that option that gets you airborne.

S-10CREWCAB.NET

Search found 266 matches

Another CC Traded!!!

Cap & Rotor

Bumper Swap

Homelink programming

Poweraid throttle body

Speaker Sizes