S-10CREWCAB.NET

SONOMA915

I am running Rancho 5000s also, compared to the stock ride they are a little firmer. I havent had any problems or complaints about the Ranchos.

SONOMA915

Perfect sense to me. Thanks guys for all of the help.

SONOMA915

Sonoma915, I ran 2" spacers in the front with my stock wheels and 31x10.5x15 BFG AT KO's. They seem to line up the best with the cutout flares. They were almost perfectly even with the edge of the flare, and did not rub either. :) When you had your three inch spacers on the rear, did everything lin...

SONOMA915

I want to run 31X10.5R15 BF Goodrich A/T on my stock ZR5 wheels. Do I need a spacer on the front, if so what would be the best size? Right now I have a 1.75" spacer on the rear. I was thinking about some three inch spacrs for the rear and moving the 1.75 ones to the front. Any suggestions? Thanks.

SONOMA915

I've seen the film that you can stick on, on ebay. If you got that you wouldnt have to buy tail lights if you got a ticket.

SONOMA915

Thanks, didn't want to get in trouble for an over sized pic below.

SONOMA915

Worked for me.

SONOMA915

I think it would look and serve more purpose as a crew cab. Other than that I'd say its a pretty sweet ride!!

SONOMA915

Glad to see the majority won!! Now you just need to find an axle for SFA swap!

SONOMA915

jeff024 wrote:I have those tails just in chrome

Mine were chrome when I first got them, I painted them because every s-10 that I have seen had chrome. Just trying to be a little different.

SONOMA915

Maybe the a-pillar is all that is different?

SONOMA915

Thought you guys might want to see what I did with my clear tail lights and headlights.

SONOMA915

Thats a good idea, I totally forgot about them. I wonder if they are direct fit?

SONOMA915

When I figure it out I will post pics and install tips.

SONOMA915

Gauge pod I picked mine up used from a ZR2.com member. LMC does list a dual partial one for '94-'03, but you may already know that. They also have a full pillar dual gauge pod #37-8261 for '94-'98 , that may be what mine is? StewartWarner lists a couple add on pods, but there are no photos. I'm try...

SONOMA915

HenryJ wrote:Is that a good thing , or bad thing?

I think it's a mixed blessing!!!!!

SONOMA915

If it is warranty work, why do you have to pay for it? They will not warranty anything that has a scheduled service interval, espicially if you havent servicd it. Thats the way we work here. I have seen alot of engine oil sludged cars that have skipped two or three oil changes and they always ask f...

SONOMA915

Link the brand you bought. What about replacing the whole trim piece like I did? http://www.s-10crewcab.com/og1/modinfo/transtemp/pod.jpg Or could you use a heat gun to make it pliable and form it to yours? Do you know the name of the company and the part number of that a-pillar trim? That would wo...

SONOMA915

A-Pillar trim panel is different shape on the 2003-2004, found that out when I tried to install guage pods. The pods are supposed to fit all s-10/blazer from 95-2001 but have the wrong profile for the 2003-2004 and I have not found anyone making one to fit them at this time. I'm trying to fit the t...

SONOMA915

Can someone with a 2000-2001 Crew Cab please post a few pictures of their stock a-pillar trim. A few different angles would really help me on my little project. Thanks.

SONOMA915

I'm pretty sure that most people on this site would take it. I bought a Honda Civic two years ago for $500 and sold it for $1500 within two months of owning it. All I did was replace the front wheel bearings.

SONOMA915

SWEET LOOKIN!!!!!!!!!!!!!

SONOMA915

Even if you get it and do a few things to it, you could always sell it for a few hundred dollars. I say go for it.

SONOMA915

I get about 215 on one tank. (City)

SONOMA915

I am in El Paso, its as far west as you can go in Texas. I go wheeling every chance I can.

SONOMA915

the only thing that hitting the Dome overide twice should do is turn your automatic headlights on or off Please explain! :shrug: Steve Its in your owners manual. I think you turn the key on and hit the dome override button about five times in a row. When you here the chime your drl's should be off.

SONOMA915

Hey HJ, what brand of filter do you use? Stock?

SONOMA915

Mine are at a slight angle, if you look at them facing the rear of the truck. If you drill your own holes, I dont think it would be to hard to get them straight up and down.

SONOMA915

It looks like a chopped Blazer. I've seen it on a couple of sites, so I don't think it's been photo shopped.

SONOMA915

The first thing I did with my truck when I got it home was remove the pinstripe. I like the look of a vehicle when its clean. When I worked as a dealership detailer we would buy rolls of pinstripe from PeP Boys and charge an extra $200 on the sticker price for custom pinstriping.

SONOMA915

The Boise kit cost me about $150 shipped and I got about 1 3/4" of lift.

SONOMA915

Welcome shift220!!

SONOMA915

No problem. Let us know how your handling changes when you are finished.

SONOMA915

Be patient and keep checking EBAY and ZR2.com daily. :D A lot of S-10s are being traded and everyone selling or trading an S-10 knows that the modifications that they paid high dollar for, adds nothing to the resale or trade in value. I agree with F9K9. You cant catch fish the first time you throw ...

SONOMA915

You will not need an alignment, because you are just messing with the sway bar. It has no impact on any part of an alignment. Hope that helps ya.

SONOMA915

Great info, I'm sure I'll be using tis method. I'll probably mark the steering shaft, just in case.

SONOMA915

Be sure to post pics of the 20's.

SONOMA915

AZS10Crew wrote: The vultures are circling already!

Your gonna need all the green you can get for gas and payments.

SONOMA915

Good luck with your new job. If you do get an F-250 dont forget to remove you sellable items from your crew.

SONOMA915

Welcome rlrnr53!! Thats why I love my Fluke!! No damage to other components.

SONOMA915

Welcoma holstdb!!

SONOMA915

Does anyone know the biggest tire I can run with stock suspension and Skidz flares? After installing the flares, my tires look a little small. I have 1.75" wheel spacers on the back. Thanks.

SONOMA915

jeff024 wrote:I had those wheels and tires on before my lift and didnt rub

Oh, sorry.

SONOMA915

Jeff024 also has a body lift. I dont think you can run those at the stock height. Am I right?

SONOMA915

we have to use spacers look at how our trucks look without them. They just look right with spacers if GM would have set these trucks up right from the start we wouldnt have to mod them so much ,SO its GMs fault if anything should go wrong :) I'm with Jeff024 on this. The bad thing is that we all kn...

SONOMA915

Could be the transfer case vacum switch. It is vacum operated through the a/c somehow. There is a topic about it. It's right above your post.

SONOMA915

I will eventually get two Bazooka tubes, they should improve the sound. As far as modding anything, all I did was remove the jack.

SONOMA915

I dont know if your rims will work, but I would like to say Welcome to this site!

SONOMA915

I only have one ten. Its a shallow mount woofer. On a scale of one to ten I would say its probably a 5. I am going to try and put in two eights, but we will see if they fit. I am a bass fanatic, but there is just not alot of room for the thumping sound system that I am used to.

SONOMA915

Don't forget to get some pics of them installed. I would like to see them on a your color truck before I look into purchasing them. I'm sure that there are alot of UPS drivers that hate the Christmas season!

SONOMA915

Mine arrived today. Haven't unwrapped them but, they have the frame mounting brackets exposed and they look good :thumb: Those suckers are heavy duty :yikes: Don't know when I will try to mount them with the current weather we have. Chris told the body lifted ZR2 guys that the the parking brake bra...

SONOMA915

Jeeps diesel motor is a Mercedes diesel. I almost got Liberty CRD, but I think they need some more field testing / time to work out the kinks.

SONOMA915

That second estimate sounds like the one I got. I just couldn't see getting rid of what little of a bed I have. Well be safe in the sand box and please pop in and say hello every now and then, so we know how you are doing

SONOMA915

Hey RidinhighS10, didn't your super lift come with cv boots? I thought that they put some that were stronger.

SONOMA915

There are only two mays that I know to fit 4 12's and that is to get rid of the back seat or do a bed cut. If its gonna cost alot I would say that you are gonna do a bed cut. Just my .02.

SONOMA915

Dont forget that Bubbaloo1983 has shackles too!!

SONOMA915

Welcome, thanks for the great info!!!

SONOMA915

There is a harness kit made by Jet, shown here at the bottom of the link. Not sure of the part number. Found it in another post.Harness Just thought this would help on your quest.

SONOMA915

HenryJ wrote:Remember these are not show vehicles and highly trained individuals will not be scoring them. Don't sweat the small stuff, enjoy the ride

Thats what I'm talkin about!!!

SONOMA915

Border Man, you have a P.M.!

SONOMA915

How are these working out? Any improvements?

SONOMA915

Welcome 20Blazer00!!!

SONOMA915

I have a question for you guys. On the front flare, are you guys just cutting the fender and not the part where the wheel liner bolts to? HJ's pictures are hard to see that part of the truck. Any info will be greatly appriciated. Thanks!

SONOMA915

Thats pretty cool. Now Borderman just needs to check it out!!

SONOMA915

Crazy!! Mrs. F9K9 must not be seing the bank statements? Huh? Oh well what she doesnt know wont hurt her.

SONOMA915

Hey F9K9, did you win the lottery or something? Your modding up a storm!!!

SONOMA915

Thanks F9K9, I'll be ordering one on Monday.

SONOMA915

Does anyone have the part number for a Jet thermostat or a PP3 thermostat for an 04 GMC Sonoma, 4.3L? I have been to both manufacturers sites and have come up with zip.

Did a search and still nothing. Thanks.

SONOMA915

All in all the new speakers will work fine...the question is how will they look?

[/quote]

They will make good projectiles when you have a panic stop!!!!

SONOMA915

Im with everyone else saying there not going to work. You will blow them and then you will be back to square one. What are you looking for in your sound system? More bass?

SONOMA915

I use royal purple 10W30 oil and a regular ac delco filter. Its about 7 bucks a quart. I change it every 5k miles.

SONOMA915

I changed mine at 30k. I'll probably start doing it at 15k. I did notice a little more mileage though.

SONOMA915

Mt Pleasant. Its about 2 hours southwest of Pittsburg. Haven't been there for ten years, but it was nice having a white Christmas. Here its cold, but hardly snows.

SONOMA915

Well I guess I'll see what happens when it comes in. I'll post my findings, if any. Thanks guys!

SONOMA915

It could be the encoder. A few people have had problems with it.

S-10CREWCAB.NET

Search found 266 matches

Spacer and tire combo

Tail lights

A-Pillar Trim

Tire Size

Thermostats