S-10CREWCAB.NET

jeggers

Yes it would flash when driving, I would reset iit and it would only come back while driving, never while sitting and idleing. It woulfd only through the p0300 code. I found a mess of issues with the truck. The transfercase switch had been bad for some time and the entire vacuum system has atf in it...

jeggers

jeggers

I have a bad switch in my S-10, I have ATF in the lines I have already replaced the front axle acuator and the acuator behing the glove box. I am going to look into a 2wd parts truck to replace the rest of the hvac system. I picked up a switch from the auto parts store. I need to drop the transfer c...

jeggers

sweeeeet

jeggers

Ah, I was wondering where that line was going ( inside the fender). Thanks again HJ. I must say I am missing my CC now. I may be turning this ex cab around I got it for a good price. Then go looking for a cc agian.

jeggers

Where is the reservoir? The line from my acuator heads straight back towards the firewall.

jeggers

Sorry for the confution, I don't have the auto track and I dont have that switch. I was looking for it, that was my original Question. I surched the net for a picture.

jeggers

I don't have the auto trac, that was my confusion.

Is there a solution for cleaning the hvac system?

jeggers

Well I don't know what this part is http://hooverae.com/upload/files/120908/5486306.jpeg but, I read some of the tread and I see where some of my problems are from, I have some serious vacuum issues. I have been replaceing componets in the HVAC system to fix the venting issues. I have a bad seal bet...

jeggers

Ya I should not try and spell on no sleep. Thanks I will look for the sticky.

jeggers

Hey guys, well working on the new to me truck, the front axle will not engage. last week i replaced m acuator, and she pulled in fine. This week the accuator is not pulling in and I cant find the vacuum valve. I have read its near the distributor and on the firwall, but I cant find it. Its like the ...

jeggers

The previous owner says the cap plugs and wires were replaced. it does mis from time to time. Where should I start?

jeggers

Hey guys, I have been with out my CC since 06 and with out a truck since 08. last week i picked up a 01 extended cab (the cc's were just out of the budget). Its a 4x4 with 213k miles on her. newer trans and motor, ruff country 2 inch lift. 31's, and, hacked up fenders. needs some love so i will be p...

jeggers

i remember there being a yellow crew cab with a big lift on this site back a few years ago. I seen one yesterday in IL that hat to be on 37's. I was wondering if it was the same truck.

jeggers

This is till the best social site I have ever found, keep it up.

jeggers

Hey Hj love the new site I wish I still had the CC

jeggers

Hey everyone, Well my cc and blazer have been gone for some time now. I have joined many forums looking for the warm welcome I had here. I have not found it . This is the best forum ever! :D I am realy glad to see it is still up and running. I stop in from time to time but unfortunatly I have a hard...

jeggers

Lowering a truck with fender flairs?

jeggers

superlift 6", hypertech, 32" tires, new rims, ect... ect.. ect.. All to traid it in.

If i were to do it again trim the panels and paint,

go with a 33x10.50-15 on my stock wheels and call it a day.

jeggers

I am alive too, I stop in from time to time but my crewcab and blazer are long gone

jeggers

superlift, 24 hour install, summit raceing, and 4" bs

jeggers

ya thats not a complete kit

jeggers

congrats

jeggers

The man loves his truck

jeggers

It worked fine for me but i did have to tighten down the body several times and i didnt have to do that befor the superlift kit . so go for it.

jeggers

I'm confused

jeggers

ouch

jeggers

I was just on the chevy wed site and it doesnt look like the max package is an option any more

I gues the 14 and 17 mpg did away with it.

well i was only getting 13 avg in my crew.

They gave me 18000 for it .

jeggers

Best picture of your crew you ever posted! That's one BAD A$$ truck Thanks Steve :D , I was sad to see it go. Vortec Max 6.0L V8 Engine Features: Thundering 345 horsepower @ 5200 rpm HEMI-beating 380 lb.-ft. of torque @ 4000 rpm(1) More horsepower than Ford, Toyota, and Nissan half-ton pickups(1) D...

jeggers

it now sits for sale $21999

mmmm not exactly what i got for it

jeggers

welcome

jeggers

thanks guys, I have no plans to mod up this truck! Not that there is anything wrong with mods. I bought it for pulling my camper and weekend driveing so i realy dont want to drop a hole lot of cash into it. mmmmmmm, well maybe a spray in bed liner and a camper cap and it needs a dvd for my daughter ...

jeggers

Jeggers, feel free to edit this post to your liking. Nice ride! -W

jeggers

Well i was not happy to see it go but i got a good deal on my trade. i picked up a silverado with the vortech max package. Towing cap.is about 9900lbs. i was going to post pics but i dont have the soft ware to resize them right now. its a cc 1LT 17" wheels and white. I don't plan on leaving this sit...

jeggers

SOLD

jeggers

I need a V8, i pull a camper that is just abut at the 4.3 l's limit and with the lift and 32s its a hard time going down the road. So i have thought about tradeing up but i would rather work with what i have . so i am open for suggestions. Some questions i have Can i use the hpp3 withe a powerdyne s...

jeggers

Chevy Silverado

looks sweet

Link't long URL -W

jeggers

my 04 is the same way the passanger side had less exposed

jeggers

welcome!

jeggers

Post some pics when they are on.

jeggers

Rust in socal????

jeggers

Holy $#!* Somecrew is it really you!!!!! I figured you sold the crew.

jeggers

link

and again -HJ

jeggers

I have been thinking of doing this myself, here is my motivation.
Muslhed's photo

Link't over limit pic -HJ

jeggers

Ya its march!!!

jeggers

Wait let me check?

jeggers

sweet

jeggers

IT'S MARCH!!!!

jeggers

I could use it to move my camper around the yard , it's 5000+ lbs

That's a great idea

jeggers

Welcome, sweet , dbl sweet. i want an 8' bed

jeggers

So true so true. But what else would we do!!

jeggers

thanks steve

jeggers

I am looking for info on fox air shox?

jeggers

sweeeeeeeeeeeeet

jeggers

Well start with 5 inches of back spaceing. Then get some cut out flares because the 12.50 will be too wide thi out them. You allmost need to cut to fit a tire that will look good on the truck, I have a body lift and 32's with 4" of back spaceing and the look small i could squeeze a 33x12.50 but will...

jeggers

jeggers

geo's rock

jeggers

http://www.s-10crewcab.com/coppermine/a ... re_031.jpg
if you have already gotten an alinement,I think you need to go back to the alinement shop. Mine sliped the first time and had to have it done again, oops.

jeggers

anyone anyone buller buller

jeggers

I'm late again . Looks grate

.

Did you do the install yourself?
Do you have a body lift?
What size wheels and what back spaceing??

jeggers

No but they look good and thats a good price

jeggers

Steve the bolts are 14mm x 110mm .

RidinhighS10
GOOD LOCK!!!

jeggers

This is what you need I dont belive a stock plate willl work i remeber during the install useing the lower stock holes fo the front crossmember. This is what you need

jeggers

I have the zr5 soft cover and it works great. It was on the truck when i got it new from the dealer .

jeggers

sweet

jeggers

GREAT POST !!!!!!

jeggers

Also i had them set for #1500.

jeggers

I had those before the lift. They will add stiffness and help with the sway issues. they will not add any ride hight.

jeggers

go with the geolanders

jeggers

I had my tires and body lift befor the suspention lift came in and i mounted the tires and eyed it i could of cleared the 32" tire with triming. They may have rubed off road but overall it would have been ok. So go for it ! If you need more clearce a small tb crank is still on the table.

jeggers

GO BIG! check out steve2003's truck 6" lift and 31's

jeggers

GO BIG!!!!!

jeggers

just tire here in il gives you six months on the alinement. the first time it didn't make it home the cam were bolts loose then i ajusted the ride hight then just had them check it all free (80.00 to start)

jeggers

Steve, sorry you are haveing problems with the truck again . like i have said befor my stock ball joints were going bad when i put my lift on at 7k and now i have 18k on the truck and they could be replaced but are still good. So i don't think the lift is realy to blame.

jeggers

sorry lol

S-10CREWCAB.NET

Search found 458 matches

Re: p0300

Re: Revised transfercase switch *READ THIS THREAD!

Re: Revised transfercase switch *READ THIS THREAD!

Re: Slys 95 CC Dimarado

Re: 15165891 front diff switch

Re: 15165891 front diff switch

Re: 15165891 front diff switch

Re: 15165891 front diff switch

Re: 15165891 front diff switch

Re: 15165891 front diff switch

15165891 front diff switch

p0300

I'm back

Yellow crew cab with huge lift

Re: hello again

hello again

The best forum ever!

Jeggers' New Ride (Pics)

I need a v8

new silverado

fox air shox