S-10CREWCAB.NET

ZIGGY K

All the lights on my instrument panel ,odometer, clock etc. flash from bright to dim and back again. The lights never go to black, but seem to flash in and out constantly. Volt meter at 14 ,good ground, battery terminals tight. Battery just a few years old. Any input would be helpful . Thanks,Ziggy

ZIGGY K

Need some input on a good set of road shocks. Something with a smooth highway and road ride . Thanks

ZIGGY K

Do the bilsteins make the ride much more comfortable now ?

ZIGGY K

Put a set of 4 ranchos on about 2 weeks ago. Shocks are very,very, very stiff! Have not been 4 wheeling with them yet. but on the highway ,doing 70-75 , felt EVERY bump

Will these shocks relax after awhile ,or should I have listened to Henry J . Did I mention there very stiff ?

ZIGGY K

Knocking

ZIGGY K

When mounting front RS 5000's ,is there room for a half inch washer on each side of the shock, two on the top, two on the bottom ? Thanks

ZIGGY K

does the life of the shock suffer by having the shafts exposed w/o the boot ?

ZIGGY K

Installed rancho's on front with shaft side down , weld side up. I also installed boot that the instructions said not to. My question is- the boot massages the cv boot just slightly. there is play between both boots. Does anyone think this is a problem?

ZIGGY K

Are you kidding me ! Those two inside fittings on the linkage were impossible to get to.

Took out the straight fittings and screwed in two replacement 90 degree ones. What type of engineer designs this ?

ZIGGY K

Is there a site that tells all the lube points on the front end of the crew that need grease ? Thanks

ZIGGY K

Need some advice on the best set of on- road highway shocks available for the S-10 crew. Do little, if any off- roading. Will a set of ranchos give me a decent highway ride ,or are these mostly for 4x4 ing ?

ZIGGY K

Looking for a set ,front and rear, of Rancho RS 5000's. Anyone know the best price on the web to purchase a set ? Ive seen them offered from anywhere between 37.00 and 52.00. Also are there different styles because of a 2" B.L. Thanks .

edited title-HJ

ZIGGY K

Just wondering , how much of an improvement the rs-5000's were over the stock shocks? Looking for something for mostly on road.

ZIGGY K

just wondering what most are using for oil in their C.C.

ZIGGY K

Need some advice on spin balancing vs. static balancing. Bought new wheels and would like to static balance them for cosmetic reasons. Have heard spin balancing is better though.

ZIGGY K

I noticed that the drivers side bolt that you turn to crank the t-bars has 5/16" more thread exposed than the passenger side . I bought the truck new so the t-bars were never touched. I'd like to crank both sides evenly; approx. 3/4", but fear that 3 and 1/2 turns may max out right side . Is it norm...

ZIGGY K

Pro comps have a 50,000 mile warranty

ZIGGY K

Is anyone running procomp A/T 's,or knows of someone who has or had a set . I see they're running a special, buy 3 get the 4th for free ! Are these tires made by Cooper ? What type of quality are they ? THANKS

ZIGGY K

Is the hose clamp on the cv boot a temp. fix or is it something that will last ?

ZIGGY K

Wamason, how is the ride with the t-bars cranked almost to max. ?

ZIGGY K

I've noticed that the front , right side of all the stock C.C's are a higer than the left. Is there a reason for this ? and does the factory do this via the T-bar crank ? Thanks

ZIGGY K

Anyone have problems with cv boots coming loose with an inch or less T-bar crank ? Or do most problems arrise when turning them to max ? Thanks

ZIGGY K

Wamason, you can never have to much good information. That's what makes this sight great !!! THANKS

ZIGGY K

THANKS,BARCH

ZIGGY K

Is it O.K. to crank one side of the c.c. more then the other ? I've noticed that the drivers side sits lower then the passenger. Also, would a half or three quarter inch adjustment be safe without worrying about boots ?

ZIGGY K

sonoma 915 ,were did you buy those taillights ?

ZIGGY K

is there anything available that mounts to the inside of a wheel to prevent brake dust from building up on the rims ? I'm getting tired of cleaning this all the time.

ZIGGY K

Need help finding 15x7 wheels with a 5" to 6" backspacing. Doesn't seem to be much out there for the C.C. Want to keep it as close to stock as possible. A list of some wheels or some pictures would be greatly appreciared. Thanks

ZIGGY K

I know not all c.c.'s are the same ... But , with a 2" b.l., a trim of 1 3/4" off the back front fender, and no t-bar crank YET... can i sneek a 15x7 wheel with a 4" b.s. and 31" tires under the truck without much rubbing ? or do i need a rim with more back spacing ? THANKS !

ZIGGY K

Looking for a set of bed rails that are on the ZR5... does anyone know were I can get a set and do they come in a chrome or polished aluminum finish ? THANKS

ZIGGY K

I bought my 2" spacers from Performance Wheel... they recommend 70/80 ft. lbs. and a RETORQUE after 25 miles.

ZIGGY K

Hey , thanks for the help !!

With a 2" B.L. and cut rear front fenders, I think I'll go with the 31'S. I just didn't know if mileage would decrease that much to be an issue ,ya know , with the price of fuel now adays

!!!! THANKS

ZIGGY K

Any regrets choosing 31's ?? and are these c.c. your daily drivers??

ZIGGY K

Is there a big difference in mileage loss going from stock rubber to larger dia. tires ?? I am going with a 30 " Pirelli Scorpion A/T; act 29.6" dia. or a 31" Pro Comp A/T ;act 30.2" . Also does the weight of the tire influence the mileage ,because the pro comp's are 41 pounds... THANKS...

ZIGGY K

quality and specs ???

ZIGGY K

Anyone know the quality and specs of this tire ??? It looks similiar to a BF Goodrich A /T , just not as aggresive. THANKS !

ZIGGY K

Bought a set of american racing wheels 136-5762's VENTURA's for the C.C. with the intention of putting a set of 31's on. Checked the specs for the rim and come to find out they have a 1600 pound limit allowing a maximum tire diameter of 29". :shock: :shock: :shock: Am i taking a huge risk by mountin...

ZIGGY K

Rock,you're running 15x8 rims with 4.25 back spacing; pushing the wheel out 2 3/4" MORE than stock plus the rubber . Now, with just trimming an inch off the front fenders ,under normal driving, you're not getting any rub??? The reason i'm asking is because i want to run a 4" back spacing 15x7 wheel ...

ZIGGY K

DO you have a body lift on that truck ??

ZIGGY K

YEA, All street driving.. all modifications for appearance only.

ZIGGY K

Thanks for the advice

ZIGGY K

Alright gentleman, 2" B.L. with an inch and a half trimming off the back front fenders; gives me 35 1/2 " opening from front of front fender to rear of front fender. Can I sneak a 15 x 7 wheel with a 4" B.S. and 31's on the front without worrying about any clearance issues???? I know there shouldn't...

ZIGGY K

jeff 024, how do those polished wheels shine up ??

ZIGGY K

ROCK, truck looks great, when you say you trimmed an inch from the front fenders;are you actually trimming the inside lip of the fender , or are you taking an inch right off the body???

ZIGGY K

Found a set of 4 GM spoked wheels off of a jimmy; Are all chevy ,gmc rims the same dimensions ?

ZIGGY K

won't be doing any off roading, all for appearance.i just wasn't sure if 1/2" of back spacing would make that much difference with clearance on the fender.

ZIGGY K

i have a 2" B.L. on the crew, if i run a 31x10.5x15 on a 5 1/2" back spacing wheel, it will obviosly help with the rubbing on the frame and sway bar then if i run the 6" b.s. wheel. My ? is ,will i pay with more rubbing on the back side of the front fender? Will a half inch make that much difference...

ZIGGY K

Truck looks GREAT !!!! :D Going for the similiar look. Mostly cosmetic, don't do any off-roading. I have a 2" B.L. Was wondering if the 1" t-bar crank was out of neccesity ,because of rubbing or just for looks ??? Going with the same wheels, and pro-comp tires 31x10.5x15's. actual 30.2 dia. and 8.1 ...

ZIGGY K

THANKS PAULEO, i'll give it a LOOK !!!!!

ZIGGY K

would like to go new ,either chrome or polished

ZIGGY K

looking for wheels to match stock { 15x7, 6" b.s.} Haven't seen many options..

would like to run 31's in the summer and throw stock tires and wheels on for the winter. Any sugggestions would be appreciated !!!! THANKS, ZIGGY

ZIGGY K

Jeff , those wheels look great !! I was wondering were you bought them and what are the specs on those wheels. Are they the same as stock rims ?? THANKS, Ziggy

ZIGGY K

i was just wondering with the wear and tear of just a 1" to 2" t-bar crank some people are having on their crews why ask for more problems with the use of these keys ????

ZIGGY K

henry j thanks for the info

ZIGGY K

am i better off going with the keys oppossed to the t-bar crank ?? as far as wear to the front end

ZIGGY K

Hey, what are t-bar keys ??? are they an alternative to the t-bar crank ?? is it easier to align with the keys ?? do they lift the front end ?? THANKS

ZIGGY K

camelott ,saw a picture of your truck, looks great !! wondering if you could list your modifications . also, how close to level is your front to the rear , it looks almost the same .. THANKS

ZIGGY K

any idea where i can locate these kits ??

ZIGGY K

i already have a 2" B.L. on my crew. would like to go up another 2-3". is there a company that makes a 3" S.L. , and is this dangerous to add a S.L. with having a B.L. already ??? THanks

ZIGGY K

THANKS justin ,

ZIGGY K

justin i see your running 31" bfg all terrains; i'm looking to run the same tires, i had a few questions for you . do you have any rubbing ?? did you crank the t-bars ?? how much ??? did it solve ALL rubbing ?? any problems with cv boots ?? THANKS,,, ZIG

ZIGGY K

what type of quality could it be ???

ZIGGY K

saw a gmc sonoma highrider in a parking lot with 31" bfg land terrain tires . couldn't find much info about these tires on the web ,was wondering if anyone had any idea of the specs on these tires ?? cost ?? were to purchase ?? I see they had a recall on the 235's, but not on the 31's THANKS :D

ZIGGY K

i'm staying with stock wheels, the largest 30 i found was a bfg long trail which ran at a dia. of 29.8 and a tread width of 7.2

ZIGGY K

ya, i' have a two inch body lift that's itching for some larger tires to fill the wheel wells.

ZIGGY K

jeff 024 ,truck looks good with 30's , looks like you cranked the t-bars,, how high did you go ????

ZIGGY K

i have 3.73 gears and really like the look of the 31's. the truck doesn't do any off roading but it crawls through about 15 feet of snow each year...

ZIGGY K

was wondering how big of a job it was to replace the whole cv shaft on the crewcab ?? and is there any special tools needed ??

ZIGGY K

trying to make a decision between 30 or 31" tires. the 30's don't seem to change the appearance of the truck from stock like the 31's do. my question is ; is there anyone who is running 31's have any regrets and wishes they went with a smaller tire?? in other words do the pros out weigh the cons?? m...

ZIGGY K

killian, truck looks great . i see your running 31" mtr's. those have a large tread width on them. are you all clear with a 3/4" t-bar crank or do you still get some rubbing ? also any problem with cv boots ?? seems 3/4" is the limit for many crewcab owners.

ZIGGY K

yes, i do have a 2" b.l.

ZIGGY K

my neighbor has a set of cooper discoverer LT 's on his jeep 31x10.5x15's. the tires look great and he loves the traction in snow. i got on the cooper tire site and checked the specs to see these tires ran at a small diameter of 30.2 and a tread width of 8.2 . are these a small 31 that may fit , wit...

ZIGGY K

Just wondering what the maximum height i could get for the front end by pushing the t-bars to the limit ?? Thanks

ZIGGY K

were might i find these fiberglass front fenders ???

and do they leave room for larger tires????

ZIGGY K

did you crank the t-bars all the way ?????

S-10CREWCAB.NET

Search found 111 matches

Flashing dashboard lights

Shock ?

Rancho RS 5000'S Review

owners with rancho shocks

Rancho RS 5000's

lube job

shock ?

Need new Rancho shocks- best price?

rs-5000

engine oil

WHEEL BALANCING

T-BAR BOLTS

Pro comp A/T tires

CV BOOT ISSUES

t-bar ?

nagging brake dust

wheel decision ?

Another Tire ?

BED RAILS

30 or 31's and mileage

BF Goodrich Land Terrains

WHEEL ?

HEY , ROCK

CLEARANCE ???

gmc wheels

back spacing ?

? for the bigfitz

wheel ?

? for jeff 024

T-bar keys

CAMELOTT 112 MODS ???

3"S.L. ???

? for justin from R.I.

bfg land terrain

replacing cv shaft

30 or 31

tire question

crankin' the T