S-10CREWCAB.NET

Justin

we need to get some trucker girl stickers with s-10crewcab on the bottom

Justin

what about a deisel engine? I bet you could find 4 cylinder or a small 8 for your rig...plenty of torque and some get 30mpg+ and deisel is roughly the same as home heating oil which only increases in the winter but it has stayed relatively the same price through the gas price hike...Would you be usi...

Justin

this link should work
http://community.webshots.com/photo/714 ... 2385ghiFbO

Justin

if that doesnt work for you, here's the link
http://community.webshots.com/s/image5/ ... gIy_ph.jpg

Justin

Walter Evan's Independent suspension rock crawler

Justin

3 on the bed rails, 2 on rear driver quarter and one on the roll pan...
I have the bedliner but if i didnt, the bed would look real bad. the inside of my roll bar is severely scratched from tools, bobcat attatchments..you name it

Justin

Just put another good one on the crew. So far, my dent tally is 7..... 1 on the body and 6 on the bed.

I keep telling myself I should make a set of bedrails out of some spare diamondplate I have..Sure enough, i dropped a chain right on the top of the bed this afternoon

Justin

does anyone know of any links to images of what the 2006 silverado or Sierra will look like? I'm debating on waiting until they arrive (mid to late summer 2005) or take advantage of the huge rebates that GM will have on the 2005 fullsize at that time..Those rebates + GMS + my crew as a trade in will...

Justin

the stuff is holding on pretty well but it is fading and after a couple of days on the jobsite, it gets pretty dusty/muddy. The front looks the best with the a-arms, etc. looking all black but I know that come winter, more rust will come.

Justin

Do you plan on keeping your crew? I think it will be one more year for me. GM plans on redesigning the sierra and silverado

http://www.gminsidenews.com/factsheet.htm

Allready agreed that I want a diesel 4door with a 6 or 8 foot bed..not sure

Justin

I'll let everyone know next week. We are expecting alot of rain these next few days.

Justin

swap the 4.3L for this

Justin

Here's what I did in the past 3 days 1) Jacked the truck up and took off all 4 wheels, pressured washed the inside to remove all brake dust. 2) Spent 4 hours under the truck with 3 wire brushes attatched to a drill to remove all rust on frame, suspension, axles, crossmembers etc. Then I purchased 4 ...

Justin

I was thinking about turning it down after the muffler but is it questionable for passing emissions? Second, I kind of like the look of dual pipes out the rear of the truck..

Justin

I'm looking into replacing my exhaust and I am thinking of bypassing a muffler all-together and just putting a y pipe for the duals.. How would it sound? Or am I better off just replacing with a flowmaster or dynamax?

Justin

People don't take into account of inflation. Sure they may be record high gas prices but it is still cheap. We pay $1.69 for 16oz. of bottled water and milk is more than $2.00 a gallon. Now i was too young to remember this but my grandfather told me that back in '88, gas prices were, on average, clo...

Justin

the crew in the city is great for a family guy. Hauls the family and cargo...small and maneuverable (maybe not!)

Justin

wow..funny how i started this thread 2 years ago

Justin

first off, find out which sub you want to put into your truck. The spec sheet will have its required cubic airspace as well as mounting depth. Those two are crucial for subs. Normally the bigger the magnet, the harder the beats (dont know why). And if there is a big magnet, there needs to be a deep ...

Justin

well i said screw it... Replaced rotors and pads in the rear...fronts looked brand new... Can anyone describe why my rear rotors and pads went at 40k and my fronts look new.. I mean i realize my brakes may have been improperly setup but why would the rear brake more than the front...shouldn't it be ...

Justin

I'm not too keen on rims but if you want to push the rears out, maybe order rims with 1.25" backspacing more than the fronts. I've got 1.25" rear spacers and the rear treads the same as the front. You will not be able to rotate your tires normally if you get different offset rims

Justin

Gary, A small Miller mig or tig (whichever you prefer) would be best but make sure its a 240 volt. I've found 120 volt welders to be useless. If you're looking into buying a plasma tortch, a welder, anda bench grinder, buy a 4" hand grinder too with multiple attachments..those are the most helpful w...

Justin

rhino liners are over 1/4" thick and im skeptical if that will wear out.. I bought the spray can of that stuff to do the roll bar and it fades and wears down....

Justin

the green wire at the tailights???

Justin

oh yeah they go crazy over them...mine can do 30mph..some have been up to 100mph. doubt any cat or dog can run that fast

Justin

would superlift be interested in a group purchase? Would be nice to install in the summer

Justin

thats not a wal-mart or radio shack special...Traxxas are quality RTR's.. I have a traxxas e-maxx with twin brushless motors, aluminum parts and knockoff beadlock wheels.. I added a locker in the rear and i can get the truck sideways. I've also been meaning to see if they make a selectable 2wd/4wd k...

Justin

ok i took one of the rear wheels off and noticed that the pads were still in pretty good condition. the outside pad looked new but the inside pad had half wear. On the other hand, the rotor looked horible. It was terribly uneven throughout the face. Some of the rotor had deep scratches. I think I'm ...

Justin

Maybe you guys can help me pinpoint the problem. Just noticed it a couple of days ago and i think its getting worse. Whenever i brake and accelerate, a screetching noise is heard. It's not a solid tone but has a pulsing schreetch. I can't tell if it stays after 15 mph (because of the exhaust noise) ...

Justin

congratulations Brule. For me, I have another year of college then I will be going for my MBA back home in rhode island. one thing this school (RPI) has NOT taught me is writing and speaking which, to me, are the two most important traits in becoming a business owner. I have raised my opinions to th...

Justin

I would love to set 35's on but im afraid about our front ifs strength...

Justin

my truck stays on the street..too expensive to go off-road..thats why i have the atv

Justin

go to "rides" second page and you'll find this (sorry for the small pic)

2001 super-duty with 34" of lift on 46's

Justin

I think alot of us would not do anything more than 6" becuase of state lifting laws. texas and florida, you're ok but just about everyone else has to stick with something a little less extravagant.

Justin

are 35's feasible with the ifs?

Justin

does anyone know what it is. I know our rear is 7.625" but what size ifs is our front?

thanks

Justin

So I stopped in at a collision repair shop that also installs skyjacker lift kits on jeeps. I spoke with hima bout my ideas on what type of lift i would like and mentioned that i needed a set of axles and some leafs. He asked me which states I would be driving in then advised me against doing any ty...

Justin

Hey guys, whats 4High, 4Low, and 2 High?

I'm trying to figure out what kind of gearing I would need for 37's and i want to be able to do 65 and have power (around 2500rpm). I'm thinking 4.88

Justin

Matt told me that the leafs were from superlift and he believes they were actually a 6" kit for the older wagoneer 23.5" center to loop

Justin

ok guys here's the deal, My dealer told me that a 12k, 12 month warranty is issued after a motor installation. Not a 36k, 36 month which I had thought. :x . Service rep didn't specify just told me i was starting like it was a new machine (should have asked about warranty info but non the less I shou...

Justin

found a dana 44 with a passanger side drop? This may sound stupid but could I flip the axle to get diver side drop? But then the gearing will be backwards???

Justin

Are you sreious? I thought MSD had quality products? Thanks for the info

Justin

I have a feeling superlift could get quite a bit of publicity from us on this kit. Think about it. I believe we are the only s-10 all 4wd forum with a couple of zr2's. Most s-10 forums are for lowered 2wd.... I know you AZ guys are interested..have superlift or some off-road magazine make a phot sho...

Justin

so now obviously I would want to find a front axle with the pumpkin on the drivers side..correct?

Justin

Yeah I wonder how his truck is making out? He is running 33's on ifs and we all have this negative notion about the TS lift kits...I think we need Highroller to come on every now and then to give us an update which may turn people into considering the lift???

Justin

here's the closest i could find with the type of font. Add a background and it should look similar

http://www.edecals.com/images/fonts/firecat.gif

Justin

copy the text of the banner at the top of this page. That is a nice design. Shredded outline looks good...

Justin

Aren't full size truck axles a little wide for our trucks? I think I will pass up the dana 70's (yes front and rear) and start looking for 44 up front and maybe 44 or 14 bolt in the rear....

Justin

Thanks Brule, But what is the terminology open rear? or full floater? I'm looking at a set of cheap Dana 70's that I would need to be restored and converted to disc. Don't know what I would do with them but you never know..possible SFA or use them for a future project. I found out from the dealer th...

Justin

I was looking through websites and particularly ebay on different axles, dana 44, dana 60, dana 70 etc with different WMS widths. Well I have no clue what people are tlaking about and i would like people to help me out if you could. first, what do the different numbers mean (i.e. 30, 44, 60, 70 etc....

Justin

Conman, I agree with you...count me in on one. When do people think they will be available. I asume a couple of months for testing....

Justin

well lets buy some. I'm not interested in a large window sticker for the windshield. More like a sticker for the middle window of my sliding rear window. Does anyone know that dimensional length? Should we all order the same style, size and color window sticker or can we order different ones? yay or...

Justin

Edecals.com is a great site to have site stickers made but they are relatively expensive. I lookined into it and called to see if I could get a cheaper price for ordering quite a few but they stuck with their figures. I also looked into buying 25 or 50 then selling them individually but wouldn't be ...

Justin

I have two craftsman tool chests about 5' high (4 seperate). The two upper tool chests are foamed. Left is cut out for screwdrivers, wrenches, pliers etc. Right top chest is strickly sockets ..1/4", 3/8", 1/2" and 3/4". I also have a small 101 piece tool set that I use more often. Bottom chests are ...

Justin

as long as you maintained the paint pretty well throughout the whole truck, there shouldn't be any noticable difference. I've had body work at 30k and the paint looks the same. Most likely, the body shop will paint the front and rear quarter panels, doors and pillars. In all honesty, I would ask how...

Justin

walked by an envoy today and took a close look at the front end. The hood looks to be similar width wise. 1/4 panels have same shell design for the headlights and could easily cut both the s-10s and the trailblazers in half and welded together. Brackets are pretty simple to make for the grill and I ...

Justin

oh yeah its been on all winter since october and it has not leaked at all

Justin

heres the link to when I first posted. It has all the information on the model and price. I am sure that they have dealer locators at their manufactures webpage. Also, they do make electric ones but no sense in having an electric sunroof at the rear because it cannot go back for me because of the ro...

Justin

When i drive to school in upstate NY, from RI, its all uphill. 31's with 3.42's, man I get around 8-10 mpg becuase I am always in 3rd gear climbing uphills on the highway. But on the way back, I get close to 16-18 mpg an i am gonna guess i average 1300 rpm's

Justin

I think it can. I removed mine for the cpu for my head unit and there was one wiring harness that hooked right up to it. i think it tied into the wiring harness out of the back of the deck. It was 2 years when I did it so I'm not to keen on how it looked but i am sure that you can ask your dealer or...

Justin

welcome Justin. I'm a Justin too and have 3 mroe inches of height on my truck...2" BL and 31" tires

http://www.rpi.edu/~crookj/truck%20pictures/

Justin

4" mounting depth may be tight for the jl 8's. Where are you putting the amps?

Justin

Well, I went to my truck shop and asked advice for the conversion. The guy laughed at me. He was trying to tell me what to do and I interrupted him teling him exactly what I had to do. All I asked was if there was a company that could lengthen and straighten the frame for me, I would finish. So afte...

Justin

Well, I've decided to look for a 7'-5" longbed for the conversion. For all practical purposes, If I will stretch the truck, I'd rather go long for more bedspace.. Tomorrow I stop in at my truck shop and ask to see if there are companies around.

Justin

I dont see it..I only see the zr2 6" kit for $1519

Justin

im sorry, you gave the difference..i mean what is the length of your shortbed to a long bed

Justin

does anyone know the dimensional difference between a short bed extended cab and a longbed regular cab?

Justin

is there a difference with these two styles? The pictures of the beds on trucks look the same. I am talking about the beds on extended cab and regular cab trucks.

Are the beds for regular cab S-10's the same as the bed's for the extended cab S-10's

thanks

Justin

until it is paid off and i am out of school. This will be around late 2005 and I hope the hummer H3T will be in production. I'm getting some great job offers for internships and after i graduate, I will have no car loans, no student loans, I haven't had a credit card so there won't be any bills to p...

Justin

did you leave any messages regarding this website in the truck???

Justin

If you need mounts , and the bed , why not just back half it? When you buy the bed get the frame rails too then you will already have the mounts you need. Save the CC bed and frame rails, pick up a cheap axle and make a matching trailer out of it The trailer sounds like a neat idea and i have seen ...

Justin

no that didn't help. Thanks though. I may just go to my local speed and truck shop and have the guy look around for me...

Justin

yeah I saw that post a while back too. I didn't see an email on the site so i sent a message through ebay. I doubt it got to him. The place that does the conversion was in upstate New York about 1 hour from my school. Wish he contacted me ...

Justin

I've decided to hold onto the crew for a bit longer but I am interested in this.... I have been seriously thinking about having my truck cut in halve professionally, extended, and dropping a long bed from a regular cab or extended cab pickup on the extended cab chasis. I would like this done for 2 r...

Justin

you can still get away with the rear sunroof....i did

S-10CREWCAB.NET

Search found 420 matches

Look at the size of the CV's

dent count..who has bragging rights

How much longer....

Complete Overhaul

exhaust without muffler

screetching noise coming from underneath

front axle size

transfer case ratio

Does anyone understand axles?

longbed and shortbed diference

long bed conversion