S-10CREWCAB.NET

Justin

there should be 1/4" steel behind the plastic bumper...I think it is just for show...I mean they are designed to crumble upon front impact so i wouldnt expect anything too strong....allthough I think GM was stupid for placing the airbag sensor behind the front of the frame (mainly stupid for normal ...

Justin

what the hell..still cant get the image right

http://www.central4wd.com/store/default ... entID=7589

Justin

hey hobie, throw some of these on and your rear will flex alot more!!!! probably to the point where you will break something http://www.central4wd.com/store/default.asp?parentID=7589 http://www.central4wd.com/images//photos/Photo7591.rcjf.jpg An image ends in ".jpg" you tried to list the URL as an I...

Justin

OH YEAH...manifold leak is now gone, computer is reset...the exhasut sounds a bit deeper and the truck is running sweet....dealer said that the manifold gasket was ripped at #4 cylinder and exhaust was coming out of the top... I wonder if these engines, now that there are so many computer sensors an...

Justin

I spoke to becky and she remembers your order jim, she said that the guys would take care of me just fine...I orderred 1 1/2" spacers ...where do u guys get the extra lug nuts to bolt the spacers to the axle? dealer or performance store?

Justin

Jim,

I tried orderring from your webiste and I couldnt get it...which truck did u put down....part #?

Justin

ok now I'm pissed at this local 4wd shop. I told them simply that I would like 1.5" spacers and they gave me this big talk of how bad they are. I realize that they put strain on the axle bearings but I will eventually purchase new rims with the correct offset. Then they were telling me that I may ha...

Justin

looking for 2" spacers for th rear...where cna i get them?

Justin

tomorrow she goes in to have the passenger side manifold gasket replaced....I'll have them clear the code so maybe that will correct the problem....who knows

Justin

I'd better start saving up!!!!!

Justin

just curious.....My buddies my age all own extremes and one friend (a little oler than me) owns a zr2... It seems like the younger generation wants the more sporty type but I love this truck and I am 20...what are your ages and general age group that gm suggests who will be crew cab owners?

Justin

about 10,000 miles into the truck, service engine light popped on and off normally on the highway and during heavy driving/stress on motor.... Dealer said missfire on #4 cylinder...they replaced all spark plugs.....came back again...dealer replaced spark plugs again and wires....It went off for a th...

Justin

Well, I now have a dana 30 for Free!!!!! I am interested in that lift but how trustworthy is it on the street and how do they lift the rear?

Justin

my theory, and you can laugh all you want, is locate a wrecked zr2 and try and buy the suspension components to somehow adapt to one of our trucks. If the frame is the same then somehow it can be done. If that is then done buy the bds-suspension lift for the zr2 which can jack the truck up 8" higher...

Justin

I am not to familiar with how the zr2 suspension setup is but are the frames the same width? If not then I wonder if the leaf springs are different and can bolt up to our trucks? I'm sure there is more to it up front though... just a thought ... I saw a rolled zr2 outside a junkyard and i was waonde...

Justin

Dealer found the exhaust leak... There was a blown gasket on the manifold....

Justin

it says those mx-6 dont come for our trucks

Justin

OH, and as for the spare tire... I need something with a smaller diameter tire.... I put a 205 on the spare tire rim and it still looks really ugly especially with the body lift, the roll pan and the hidden hitch. I need something along the lines of a 24" tire so it sits parallel with the bed of the...

Justin

flowmaster 3 chamber 40 series single in dual out. They offer a single in single out if you have no desire for dual exhaust. Best bet is to buy a muffler with the inlet off to the side of the muffler, not center and an outlet the same. this way here, it's easy on anyone. The thing is that our stock ...

Justin

I desperately need new shocks and because I haul alot of construction equipment and attatchments for excavators and bobcats, I need an adjustable shock.... I was thinking about getting the Rancho RS 9000's with in cab adjustable meter. Think it's a good choice or am I just paying for the name?

Justin

there aren't any at dealers in Albany, NY and at my dealer back in Rhode Island, they are in order. maybe this means our trucks will hold value when we trade them in :D this will be good for me because the sitcker was $28,000 and after swindeling the salesman and also saying my grandfather worked fo...

Justin

Yeah I'm probably going to do the same a2b....Now that I have installed the body lift, I am going to have to reweld extra pieces and I'm thinking of adding diamond plate as a skid plate... It should look good

Justin

Ok I'm stupid, I started the truck before putting the fuse to the airbag back. Now my airbag light is constantly on. I tried disconnecting the positive terminal to the battery thinking it would clear the code but it didn't. Do I have to go to the dealer and have them clear it?

Justin

Ok guys, My body lift is now on. It took me 7.5 hours to complete and might I say WOW! I measured it and I got around 2.5". These trucks should come from the dealer looking like this... I got a couple of questions though. 1). I was able to rebolt the oil lines to the oil pan...is that stretching it ...

Justin

I have them all around and the only thing I don;t like about them is the road noise (wind noise) they create driving on the highway with the windows open a crack. it's loud and You can't understand a conversation with another person. i normally drop the rear windows down a little and it is more suttle

Justin

I have a full size spare unofrtunatly. i want a donut because if You can see in some of my rear end pictures, the tire hangs down a little. This is because I have the hidden hitch behind the roll pan and it is designed for use with a small spare tire or none at all. i may go to a junkyard at some po...

Justin

has anyone posted a topic in the s-series.org about that AIM 9.5" lift?

Justin

total installed was about $300 . I ran the pipe just the same way as the passanger side and shoved it up in front of the axle as far up as possible. Some guy did it professionally on a sunday (a friend) and all we had was steel not stainless.. once i get the stainless ill have it redone. i feel emba...

Justin

bought a flowmaster 40 series single in dual out and had 2.25" pipe ran through the back just like the stock as well as the other side. Then I had 3" Gibson Tips at the end. I don't personally like the job because he didn't use stainless steel. I plan on redoing my exhaust after I get a high flow ca...

Justin

it sounds like i have a manifold leak

. Will the dealer fix it for nothing (under warrranty) after I put the custom dual exhaust on?

Justin

Oh yeah i fogot to mention, the day after i bought the truck, it was all in pieces, dash, carpet, seats, doors. i was driving around for a week with just a seat and the steering column and wheel......The trucks interior is 90% dynomated. the tub, doors, rear wall and ceiling is done to keep the soun...

Justin

Well, I really didnt cut it. I popped the 4 rivets holding the jack casing from the cab. Then I took rubber washers and aluminum rivets to cover the holes and keep it weather tight. As you can see in the picture of my setup, there is my jack and wrench still behind the seat in front of the amps. I c...

Justin

here is my setup.

fosgate 400x2 with a 8" square kicker l7 in a custom made box with .33 cubic airspace.. This is very loud, very crisp and sounds better than my 12 I had in a jeep wrangler.

http://www.thebestbuddies.com/pic/membe ... justin.htm

Justin

took me 11 hours to make the prerunner bar, 23 hours to make the roll bar

Justin

click on the 3rd page for closer pictures http://www.cardomain.com/member_pages/view_page.pl?page_id=251351 I basically went to Home depot, Bought 1.5" and 1.25" high pressure steel steam piping, went into my weld shop, cut and fit the pieces into a wooden made jig, welded all edges, capped the ends...

Justin

ok thanx for everyones help. especially Jason for that last reply. I finally purchased it and hopefully it will be here before the weekend. I've narrowed it down to 3 types of tires now to complete it, the 31" geolanders, the 31"x11.5" mickey tomson baja or the 31" tsl thornbirds

Justin

alright i've done some research and now i am completely confused!!! people say that kit #192 is the same as kit #142

http://www.loudzr2.homestead.com/2in.html

If thats the case, the kit is still $175

any suggestions?

Justin

OK I just went to my 4wd auto place and asked for the body lift #192 from PA. They told me that retail was $299 and they could sell it to me for $260. At the mod info page under crewcab2ya.com, it is said to have a price of $125. Does anyone know where i can get it for that price?

thanx,

Justin

Justin

mine cost me $40 worth of materials and it is bolted to the frame, not the bumper... Sometimes I think i like to custom make stuff...makes it look unique

http://www.cardomain.com/member_pages/v ... _id=251351

Justin

so if i get this 2" body lift will 31"x 10.5"x15" rub on the stock rims? Will I need spacers? Please let me know I would like to buy this tomorrow....

thanx for your info

Justin

Justin

and performance accessories says that they dont have any 3" body lift for our trucks? is there any other company? I would like to go buy this monday....

thanx guys,

Justin

Justin

when does superlift anticipate their arrival of the 6" lift?

and why does every lift company always put out lifts for bigger trucks?

Justin

a2b.... Are you talking about a 3" body lift? or are you talking about the 3" superlift suspension lift? I'm really not down for the solid front axle swap unless it will be easier than messing around with the ifs. I am very upset at whiplashsuspensions. I have repeatedely asked when their 10" lift f...

Justin

woops...forgot the link...

http://www.cardomain.com/member_pages/v ... _id=251351

more pictures to come

Justin

BL soon to be installed

3" shackles soon to be installed

torsion crack soon

31" tires soon

5" trailmaster this summer

all custom bending, welding and fabricating on the roll bar and prerunner bar

tell me what you guys think...

thanx...Justin

S-10CREWCAB.NET

Search found 420 matches

wheel spacers

age of crew cab owners

service engine light

Zr2 and regular s-10 suspension differences

RS 9000's

airbag light after body lift

body lift installed

got an exhaust problem

body lift price?

tell me what u think?