Search found 463 matches
- Sat May 28, 2005 9:05 am
- Forum: Crew Cab Modifications
- Topic: Brake Caliper Paint?
- Replies: 4
- Views: 453
We are going to need more details. What brand did you use? Where did you buy it? How much did it cost? Ummm. I think I used the Duplicolor. It is available everywhere. Like any Auto Zone, K-Mart, Wally World, etc. I can't remember how much the "kit" cost. I just know that it was under $20. I went w...
- Sat May 28, 2005 6:46 am
- Forum: Crew Cab Modifications
- Topic: Brake Caliper Paint?
- Replies: 4
- Views: 453
Brake Caliper Paint?
Keep us up on your opinion of the brake caliper paint.......... To paint or not to paint! That is the question??? Well, I painted mine. Red truck, red calpiers. Some may think that this is a "Ricer" mod. Well it is! I don't care! I like it. I painted mine because, when I bought after market wheels,...
- Sat May 28, 2005 6:16 am
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
Much better :thumb: ....... Good job! :oops: Awwww, go on........ :oops: No! Really! Go on!!! :lol: I did have a bit of problem with a small portion of the new front bracket rubbing on the body mount. Metal to metal didn't sound too good! Even the slightest bump made the rubbing noise. Pretty simpl...
- Fri May 27, 2005 6:32 am
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
- Thu May 26, 2005 9:03 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
For the back brackets, I ended up using some nice 3.5" washers that I painted black. You wouldn't notice them unless you were really looking for them. That brought me out almost dead even with the front. But guess what?? I drilled too low in the back so they aren't exactly straight now!! :x But you ...
- Thu May 26, 2005 8:41 am
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
Update! I got the material needed to make my front brackets. They are fine. But now I need to add a piece of metal between the bar & the back mounting bracket. The mod to the front made it stick out further than the back. Should be a simple fix though. I just need to find some kind of metal stock th...
- Thu May 26, 2005 7:22 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: S-10CrewCab.com Invitation
- Replies: 12
- Views: 853
Yep! I made my own business cards & keep them in my CC at all times! I have been known to "tag" another CC in a Wal-mart parking lot! Heck! My oldest son ( 12 ) and I have fun with it! We drop my wife off at the doors to a shopping center or grocery store and drive up & down each aisle looking for "...
- Thu May 26, 2005 6:17 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: i got media coverage!!!
- Replies: 17
- Views: 1330
- Tue May 24, 2005 7:36 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
- Tue May 24, 2005 7:31 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
Sweet! I was rather busy today so I'll be stopping by a weld shop tomorrow. I hate to even look at the bars the way the are now. Sorta embarrassed to even drive the truck that way. Hopefully I'll get the angle iron, paint it up nice, & have it all fixed up by tomorrow evening! 8) I'll definately kee...
- Mon May 23, 2005 7:03 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
Yeah, yeah!! Of course I have the drill & bit! I was reffering to the torch or plasma cutter. I'm glad you posted on flipping the front brackets! I should have known that you would have tried that. Seems like when you set out to do a project, you research it pretty well! Even if it's something as sm...
- Mon May 23, 2005 6:34 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
And one more thing! The few people that have seen the nerfs the way they are say I'm stupid for wanting to raise them! They say they look fine the way they are. Of course my wife says, "Why do you always have screw around with stuff?! Why can't you just leave things alone?!" :rant: ........ :| I jus...
- Mon May 23, 2005 6:29 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
Thanks for the compliments, guys! Right back at ya! It is all of YOUR trucks that keep me wanting more! You know, "Gotta keep up with the Jones's!" :lol: HJ, I read your posts before about raising the nerfs. I really want to do that!!! It just stinks not having the right tools for the job. :x I was ...
- Mon May 23, 2005 3:57 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
Hey, everyone. Got the new nerf bars & installed `em. Thought I'd share some pics. http://img.villagephotos.com/p/2005-3/970646/CopyofDSC00986.JPG http://img.villagephotos.com/p/2005-3/970646/CopyofDSC00987.JPG http://img.villagephotos.com/p/2005-3/970646/CopyofDSC00988.JPG I don't like them as much...
- Sat May 21, 2005 6:48 am
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
- Sat May 21, 2005 5:37 am
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
- Fri May 20, 2005 2:57 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
- Fri May 20, 2005 9:52 am
- Forum: Tires / Lifts / Suspension
- Topic: How did you Mod your nerf bars?
- Replies: 15
- Views: 1237
- Fri May 20, 2005 9:13 am
- Forum: Tires / Lifts / Suspension
- Topic: How did you Mod your nerf bars?
- Replies: 15
- Views: 1237
- Fri May 20, 2005 4:57 am
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
- Thu May 19, 2005 6:33 pm
- Forum: Crew Cab Modifications
- Topic: Finally they are making a domed cap for the ZR1 wheels
- Replies: 26
- Views: 3484
- Thu May 19, 2005 6:01 pm
- Forum: Crew Cab Modifications
- Topic: Finally they are making a domed cap for the ZR1 wheels
- Replies: 26
- Views: 3484
- Thu May 19, 2005 4:17 pm
- Forum: Crew Cab Modifications
- Topic: Finally they are making a domed cap for the ZR1 wheels
- Replies: 26
- Views: 3484
Hey, Jim!! I like that sticker on your center cap!!!
[img]http://img.villagephotos.com/p/2005-3/9 ... 825[1].jpg[/img]
That n's mine!
[img]http://img.villagephotos.com/p/2005-3/9 ... 825[1].jpg[/img]
That n's mine!
- Thu May 19, 2005 4:02 pm
- Forum: Tires / Lifts / Suspension
- Topic: How did you Mod your nerf bars?
- Replies: 15
- Views: 1237
- Thu May 19, 2005 3:45 pm
- Forum: Crew Cab Modifications
- Topic: nerf bars / step tubes
- Replies: 48
- Views: 3889
- Wed May 11, 2005 5:52 am
- Forum: Crew Cab Modifications
- Topic: Wondering on Good Place to Buy Aftermarket TOYS!!
- Replies: 17
- Views: 1388
Welcome!!!!
Open your check book & make sure you have plenty of ink in your pen! If you get the "mod bug" like me, then you you'll need `em!
Here's a link to get you started:
http://www.truckxccessory.com/truckxcce ... w-cab.html
Open your check book & make sure you have plenty of ink in your pen! If you get the "mod bug" like me, then you you'll need `em!
Here's a link to get you started:
http://www.truckxccessory.com/truckxcce ... w-cab.html
- Tue May 10, 2005 5:56 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
BTW.... I bridged my amp and now my old 8's kinda sound a bit better! I don't know why but the do. They still distort at higher volumes so I am still going to get some new ones that can handle more Watts, but for now, I am almost satisfied. Besides, I just bought.... er.... invested in new door spea...
- Tue May 10, 2005 5:49 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Gotta VENT!
- Replies: 8
- Views: 1025
All I have to say is WOOO-HOOOO! :D :D :D :D :D :D :D :D :D Hey Corey! Guess what? It was only the battery after all!!! When I got home, I tried to start it. I got just the starter ticking. Put in on the charger for a bit and BANG! She fired up and so did the radio!!!!!! Amazing! If you would not ha...
- Tue May 10, 2005 10:06 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Gotta VENT!
- Replies: 8
- Views: 1025
Man! Now I can't wait to get home to check all of this out! (I'm at work now.) I did stop at Best Buy on my lunch & they told me that the install was guaranteed for life. That's good news! I'll put my new speakers in, and start 'er up. If it's still screwing up on me, I'll take it back to Best Buy &...
- Tue May 10, 2005 6:41 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Gotta VENT!
- Replies: 8
- Views: 1025
OK. So that's pretty good news. At least I know that I didn't screw it up! Whew! Now I have to figure out what the problem is exactly. Maybe when I tugged the speaker wires in the door to get a little slack, I pulled something loose. I bought the radio from Best Buy & had them install it. That was a...
- Tue May 10, 2005 5:29 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Gotta VENT!
- Replies: 8
- Views: 1025
I didn't hook the factory speaker back up. But I did disconnect the new one & just left the wires bare, not touching. Then turned the unit back on. It comes on without sound & shuts down after about 15 seconds. Or it will run fun but shut down after about 15 seconds. I keep turning it back on & it k...
- Mon May 09, 2005 7:58 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
I sure am glad that I have found this board. Mark, I appreciate your help. I just wish that I would consult the board BEFORE I attempt something on my own. Like with my door speakers!!!! Anyway, that's all in another post. I better not get started on that here. It sounds like I wanna go with the two...
- Mon May 09, 2005 7:51 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: Speaker wire color codes
- Replies: 7
- Views: 1124
- Mon May 09, 2005 7:45 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
- Mon May 09, 2005 7:32 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Gotta VENT!
- Replies: 8
- Views: 1025
Gotta VENT!
ME + CAR AUDIO = :x :x :x :x :x :x :x Well, I was TRYING to hook up new door speakers. I was only on my first one. Driver side front door. I had it hooked up with the balance & fade to that speaker. (Aftermarket Pioneer radio BTW) It sounded good and I was just about ready to put the speaker back in...
- Mon May 09, 2005 6:10 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: Speaker wire color codes
- Replies: 7
- Views: 1124
Speaker wire color codes
UUUgghhh! I am trying to install new door speakers. Anyone know the color codes for them? Which ones are positive & which are negative???
- Sun May 08, 2005 5:03 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
OK. I'll have to check out epinions.com. Also, I was considering just going with one 10" sub instead. It's probably just as good as 2-8's, wouldn't you think? I guess I should quit whining on this board and just go buy some subs for cryin' out loud, but I wanna get the most "bang" for my buck so to ...
- Sat May 07, 2005 6:38 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
Thanks!!!!!!!!!!! That's JUST what I wanted to hear! I didn't understand a WORD you just typed except for the "...get new subs..." part! I have been looking at the Sony X Plods. Do you have any knowledge of them? (Also, I just figured out that my current subs are just paper. That doesn't sound too g...
- Sat May 07, 2005 3:48 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
OK. So I finally found my manual to my amp. It is just a Rockford Fosgate Punch 150S. Here are the specs: 4 Ohm load per channel: 37.5 Watts X 2 2 Ohm load per channel: 75 Watts X 2 4 Ohm load Bridged (Mono) 150 Watts per channel I am running 2 subs off 1 channel. I am pretty sure my subs are only 1...
- Wed May 04, 2005 12:56 pm
- Forum: Stock Crew Cab
- Topic: Tailgate cables
- Replies: 34
- Views: 3437
- Sat Apr 30, 2005 10:38 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
Thanks guys! I appreciate your help! As I said before, I don't know much about my subs other than the brand. I did a little research, however, and found that the latest vesions of my subs in the original enclosures that mine came in run around 100W RMS. So maybe that's it! My poor little subs can't ...
- Wed Apr 27, 2005 6:35 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
- Tue Apr 26, 2005 4:43 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: pulled my friends extended cab silverado out today.
- Replies: 3
- Views: 513
- Tue Apr 26, 2005 4:33 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
Thanks, Mark. I am fairly certain that the amp is just around 200 watts. The speakers, I have NO idea. I tried to look before I installed the subs in my box but I didn't see anything. I kinda thought it was the subs though. Everything sounds good at low volumes. It's when I start to crank it a bit t...
- Mon Apr 25, 2005 7:54 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: 8" sub recomendations
- Replies: 23
- Views: 2035
8" sub recomendations
I currently have 2-8" subs in my home made box. They are VERY old. I bought them in separate speaker boxes about 12 years ago. They are MTX Road Thunder II's. They were originally ported and had a tweeter on top of the box for each. About 2-3 years ago I purchased a Rockford Fosgate amp. I think it'...
- Mon Apr 25, 2005 6:24 pm
- Forum: Stock Crew Cab
- Topic: Saw 2 ZR5's today and...
- Replies: 16
- Views: 1617
- Mon Apr 25, 2005 6:08 pm
- Forum: Tires / Lifts / Suspension
- Topic: BL is done
- Replies: 23
- Views: 2108
Looks good, F9K9!!! I gotta do that gap guard! I HATE looking through to the other side of my truck in back. The front doesn't bother me. Is that the rubber stair tread idea? I tried to find some at Lowe's with no luck. Said they don't carry it anymore. So. There's a mod that needs to be done with n...
- Tue Apr 19, 2005 12:31 pm
- Forum: Stock Crew Cab
- Topic: Detailing, wax, and super secret clean-up tips
- Replies: 62
- Views: 19878
Another good thing about Zaino is that you can use it in the sun and use a back and forth motion when applying it rather than the standard Karate Kid motion. I have heard a lot of people swear by the Zaino stuff. I am tempted to at least try it. I don't see how in the world you could apply it in th...
- Fri Apr 15, 2005 10:03 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Back-up light wiring
- Replies: 87
- Views: 50321
- Fri Apr 15, 2005 7:22 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Back-up light wiring
- Replies: 87
- Views: 50321
- Thu Apr 14, 2005 6:59 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Back-up light wiring
- Replies: 87
- Views: 50321
- Thu Apr 14, 2005 5:01 pm
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Back-up light wiring
- Replies: 87
- Views: 50321
Thanks, Hammer. I appreciate your help. I like that idea of putting them in the bumper! That sounds cool! IF I could pull it off! A pic of that would be great! So, do I need a relay if I'm just running a light like HJ's??? Again, I'm wanting a constant hot source. Not just when the back up lights ar...
- Thu Apr 14, 2005 11:55 am
- Forum: Electrical Modifications / Audio / Video / Lighting
- Topic: Back-up light wiring
- Replies: 87
- Views: 50321
- Wed Apr 13, 2005 1:30 pm
- Forum: Tires / Lifts / Suspension
- Topic: Cheap Rims
- Replies: 25
- Views: 1736
Whatever wheel you decide on, check out wayneswheels.net. He's in California and I'm in Ohio. Even after all the shipping from there to here, my wheels were cheaper through him than if I bought them locally. I think he usually has some kind of blowout on certain wheels that are being discontinued. D...
- Tue Apr 12, 2005 5:25 am
- Forum: Crew Cab Modifications
- Topic: RED Bowtie Emblem
- Replies: 6
- Views: 592
I just went to a local sign shop and they gave me a scrap piece of red vinyl. I laid that over my emblem and used a razor blade to trim off the excess. Turned out pretty good! I'll post a pic if you'd like, but it's a "solid" red emblem now. Not outlined like the SS badging. (BTW, my CC is red, that...
- Tue Apr 05, 2005 1:40 pm
- Forum: Tires / Lifts / Suspension
- Topic: Body lift this weekend
- Replies: 16
- Views: 1304
I know that one of my pains was that the body mount bolts behind the front bumper took a 18mm wrench. Trouble was that I didn't have any! My set only went to 16mm! So I had to go out & bug my neigbors until I found someone that had one. I had some other troubles but most were because I was doing the...
- Sat Mar 26, 2005 2:54 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: GPS , advice on what to get.
- Replies: 54
- Views: 9974
- Fri Mar 25, 2005 2:59 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: GPS , advice on what to get.
- Replies: 54
- Views: 9974
I would like to get into geocaching. I read up on HJ info that he posted and it sounds like fun. Especially if it takes me off road a little!! :wink: I would also like to have the ability to use it in the truck when going on long distance trips. To keep track of Interstates & what not. Does anyone k...
- Fri Mar 25, 2005 2:26 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: GPS , advice on what to get.
- Replies: 54
- Views: 9974
- Wed Mar 23, 2005 4:02 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: GPS , advice on what to get.
- Replies: 54
- Views: 9974
- Wed Mar 23, 2005 11:02 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: GPS , advice on what to get.
- Replies: 54
- Views: 9974
- Tue Mar 22, 2005 6:33 am
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181
- Mon Mar 21, 2005 7:09 pm
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181
- Mon Mar 21, 2005 6:46 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: blinker going fast *solved*
- Replies: 32
- Views: 3521
Well, wouldn't ya know it! My battery died in my digital camera! :x Always right when I need it! Anyway, my ground connect to bolts on either side of the frame beside the bolts for the rear bumber mounts. Be careful tugging & pulling on them. I think my ground was pulled from from my fuel pump the f...
- Mon Mar 21, 2005 6:34 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: blinker going fast *solved*
- Replies: 32
- Views: 3521
- Mon Mar 21, 2005 6:13 pm
- Forum: Stock Crew Cab
- Topic: Buzzing Noise Behind Guage Cluster
- Replies: 11
- Views: 2699
- Sun Mar 20, 2005 8:55 pm
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181
Got er dun! I now have a measurement of 35" from ground to fender lip in front, and 37" in back. I can't remeber what it was before. :x I only know that it looks MUCH better now having the TB done with the shackles, BL and tires. Actually LOOKS like a 4x4 now! I HATED when people seemed shocked to h...
- Sat Mar 19, 2005 7:01 pm
- Forum: Tires / Lifts / Suspension
- Topic: Just new tires and the dealer won't touch it...
- Replies: 18
- Views: 1191
- Sat Mar 19, 2005 6:59 pm
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181
mine are the same way I think I could get almost 2in from the driver side and 1 1/2 from the pass side... So does that mean I can go a little further??? I would like to go 1 1/2 inches so that it'll settle to an inch. Wadda ya think??? EDITED On second thought, I think someone told me not to max ou...
- Sat Mar 19, 2005 6:14 pm
- Forum: Stock Crew Cab
- Topic: '03 vs '04 crew
- Replies: 3
- Views: 610
- Sat Mar 19, 2005 6:07 pm
- Forum: Tires / Lifts / Suspension
- Topic: Just new tires and the dealer won't touch it...
- Replies: 18
- Views: 1191
What you are saying actually makes sense. If you tried to get your speedometer corrected under warranty then they won't do it because your tires are not stock. You should just save up for a HPPIII, because yoy will have the ability to change things whenever you want. If you pay them to recalibrate ...
- Sat Mar 19, 2005 6:00 pm
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181
OK guys! I'm in the middle of my TB crank and I have a question! I hope someone can help me out pretty quick. I cranked my driver side about 4 1/2 turns, got about an inch out of it and I have about 1/2 inch left on the bolt before I bottom the bolt out. But the passenger side, I cranked only 2 turn...
- Sat Mar 19, 2005 10:00 am
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181
HJ, I gotta sing your praises! You are THE MAN! I appreciate you trying to explain this (and other things in other topics :roll: ) to me. You and all the guys here on this forum are... as they might say in `da hood.... "the shizznit!!!" :lol: And I guess it's time to put the old clothes on and get t...
- Sat Mar 19, 2005 7:45 am
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181
I know I'm a little slow, but I don't understand all that "Z height" information. :? I guess to put it into simple terms, I wanted to know if I take a measurement from the top of the tire to the bottom of fender before and after the TB crank, what is the greatest gain in inches that I can expect to ...
- Fri Mar 18, 2005 8:08 pm
- Forum: Tires / Lifts / Suspension
- Topic: Is that high of a TB crank safe?
- Replies: 15
- Views: 1181