S-10CREWCAB.NET

camelott112

does anybody know if these became a reality... just want to know if he is making them or not

camelott112

actually i have heard that cleargearz are very durable...not sure if im skeptic about it though

camelott112

i know its a 10 inch twisted suspension lift like the one made for the full size gm pickups right hj totally bolt on no cutting or welding required

cmon hj is that what it is (just so nobody gets crazy that was a joke)

camelott112

im overly excited tell me hj or i may just die haha

camelott112

nice info on the prindle buisness there rock...haha learn something new everyday anyway coffeedrnkr do the faces cut off the words in your dase like the service engine light and whatnot i just dont like when the dash looks sloppy i mean 25 is a good price then again you get what you pay for i guess ...

camelott112

way off subject but your white gauges look great i need to get some

camelott112

i had thought this before but i have been gone for a bit what if you side mounted it i mean just over the fender well so that you can attach it over the bed that would be awesome i dont think the functionability would be as great but that way it would just sit over the bed and with a tonneau i would...

camelott112

i think it was the best mod made to my truck it not only jumped my horses but i was getting killed on gas before because i had the bigger tires and they were throwing my shift points all off so i was burning gas like a mad dog

camelott112

the rims on my truck were actuall designed for the s10 they are american racing but i dont remember the name on them but im sure that they make a fer with the proper bs and tire width im in the gallery if you want to see them on the truck

camelott112

yeah but dont you have a body lift jeff??

camelott112

30x9.5 tops the thicker the tire the more "rub" issues you wil have i run 31x10.5 if i would have gone 9.5 i would have been fine

camelott112

with alot of swears and some bumbs and bruises i got mine in under 9 hours all by my lonesome the be sucked by myself though

camelott112

im sure with just shackles and a t bar crank you can run 30's maybe need a little bfh modification to the rear of your fenders but you are going to look way stuffed on those tires

camelott112

what kind of tire are you looking at putting under there a mud or a street there is alot of time that goes into that decision and performance mods go into account accordingly

camelott112

MAGNA! nice setup...look into it

camelott112

not to encourage you to take advantage of mrs. rusty but if she give you an inch take a mile before she can blink for example honey you can get new shox....so your gonna need a couple dual shock mounting brackets and 6-8 shocks hmm well maybe it is time that we put some new tires on the truck mrs ru...

camelott112

if you go back and look at the old thread of when the guy from the sl site (he was some rep for them) was here talking about the kit i was all flustered bc they said 95-03 well i am one of the few as well that have an 04 and i was mad bc i didnt think a shop would install it or if it would line up s...

camelott112

yeah thats a good price with shipping included

camelott112

tis a sweet setup

camelott112

there is my baby and me on new years eve

camelott112

2 inch body, 1.5 daystar shackles and a pretty hefty tbar crank when i shot my laser level along the molding to check it out i am dead level im thinking i may just go huge from here and sas it but not for a while i need a nice setup for the terrain here maybe at the end of the summer just in time fo...

camelott112

chris is that flame on the top going to stay there i have seen pretty exotic designs on boxes i just didnt know how they were done you just resin and glass right over it?

camelott112

oh i see i put all that time and hard work into a drawing and you guys leave me hanging man talk about deserted in desperation hahaha oh well if you have an idea let me know if not ill get some stuff figured out and post something for you

camelott112

i would say just be careful that is how i lost my front valence pulling out an f350 that was in the 4 foot snow filled median andout 6 feet

camelott112

good newcomings to f-body dreams i cried when they put out the crappy ssr and retired the comaro

camelott112

thats jsut sad ill make sure to let you guys know if i get rid of mine ever ppl are just leaving left and right just leave the website in the glovebox i guess it may as well replace the owners manual

camelott112

4wheel online had them for sale buy 2 get 2 free when i was in the desert and i was just out of funds the wife then sure knew how to total a bank account immagine my sadness when i realized i was 7 dollars short of a full set oh well its laughable now

camelott112

did mine alone in just under 9 hours well about 8.5 to be exact but the bed got tricky luckily i already had my 31's on there and i just used 2x6's and stood the bed on the tires

camelott112

ic i will have to try that im sure ill be able to notice even though it is summer here now and its getting up to about 40 degrees everyday

camelott112

i dont have the insignia's on the mirror itself so do i still have them because i have the button??? i know im about to be shamed...

camelott112

some crew that is sl= suspension lift not a bl there are too many problems with a 3 in body steering bracket extenwions and what not

camelott112

hope that gives someone a general outlook wo i can get some input on the best way to get this done

camelott112

here is a quick basic layout

camelott112

hj...jim...do either of you know at all???

camelott112

those are pretty sharp man i like them alot ZrCrew? nice good word play

camelott112

ok so when i lay the glass do i do it inside the fleece on the inside of the box or do i do it outside the fleece on the outside any tricks or tips from those of you who know that may help me out when i do the whole thing ill do a write up but i just had some last minute questions

camelott112

i will definately shoot you a holler when i need we actually may be able to do them together i am origionally from erie i see your from lancastor thats not to far at all ill be home in about 10 days wish i was going to have my truck but its gotta stay here in alaska

camelott112

i found a great how to site on laying pics and all i actually thought i was looking at one of hj's info sites but here is the link glass laying[url]

camelott112

hey kc when you made them what did you make them out of i know the actual for sale ones were going to be abs but i mean did you form them with abs?? just curious i want to make a set for myself and ill try my hand at just about anything

camelott112

yep got the bl i suggest if you go bigger tires get your computer fixed for them

camelott112

actually the shackles wont slump like you think and if his topper is fiberglass then it wont weigh all that much so there wont be much leveling from it like you would think it may compress the springs a hair but thats about it and how it would look without here is mine with shackles and a tbar crank...

camelott112

home depot will have it all

camelott112

Anybody ever tried to lay fiberglass i have found a couple how to sites but nothing too great just needed some help if all goes well i think i may make some finders for myself but i figured i would use it for my subs first

camelott112

ok so here come the questions well just one for right now has anybody seen the four (they looki like tie downs) behind our back seat square shape and they look like they are tach'ed on or riveted on its a whole section under the carpet how do i get it off?? i already tried a bfh and no go am i going...

camelott112

sounds like a sweet little hook-up can you get us some pics good bad or ugly?

camelott112

go to the picture gallery and look at KCustom's truck he is running the superlift 6 with the 2 in body and as for the tm and a 2 in body i think quick biker is running it but he may not have the 2 in body

camelott112

well yeah skidz but im saying why dont you just take kc's molds and get them pulled too i mean you obviously have the tools for the job

camelott112

well i got the first part of the sound system in today well other than the speakers i mean hardware wise i got my apc racing seat black and blue i think it will be cool to set the inside of my cab in blue then the underbody in red (red sox colors!) but im going to take out the rear horror of a bench...

camelott112

maybe skidz could take them and just have a cut out model with the bolts showing and his whenever they get done

camelott112

i wish there was an emotiocon that was sitting in the infamous @$$ kicking machine haha oh well worser things have happened to better people

camelott112

not to dig up an old thread but i got one and it didnt fit it said it would fit an s10 but it didnt i guess it was a great waste of 80 bucks it was flat and left a gap above the door and then it didnt bolt on at all after that so i cried a bit drank a beer and put the white one back on any ideas on ...

camelott112

you can check me out in the gallery but i cant tell you just yet how much milage im gonna get out of them

camelott112

i have not even been able to find a shift kit for our trucks....

camelott112

i would say if your gonna go to a 31 make sure you have the cash to get something like an hpp3 bc your gonna notice a big difference no regrets after that though

camelott112

well i may as well say it bc if not someone else will what about duals custom is the only way i have found

camelott112

they look like bf goodrich all terrains hahaha ill see what i can find seriously

camelott112

its a rattle im talking like if you have had a stressful day just gun it and get a massage in the drivers seat i went to get an allignment today and the guy said that i had to put my old tires on to get it done because there is no rim lip with the tires i have on there now

camelott112

i emailed greer tank and welding if you are interested do a search on google they will be the first to pop up but i asked if they would be able to make a mold and pull about a dozen pairs or so if this is the case and none of you guys would object ill run the leg work on this please give me your input

camelott112

barch you always make me laugh man i love the doggy bone style will that help deflect any rocks while driving? oh yeah and i never got to ask is that a picture of you on your icon

camelott112

the only thing that really concerns me is the fact that these were looking pretty fair price wise from kc and if somebody else takes them and makes them are we going to see an increase in price?

camelott112

ok so last weekend i tood penee on her first endevor and i high centered her on some ice framed out and an inch to the ground threw my allignment out and now i veer to the left and its a little goosy on acceleration the thing im concerned with is that when i juice it i get a pretty bad rattle and im...

camelott112

haha i am rolling on the ground at the thought of that...! thanks for the laugh i needed that i would just box it maybe folded and ship it out but like i was saying about kcustoms flares dont stick to an origional design think outside the box you may be able to better what i have done only to make t...

camelott112

oh hj up with hope...down with dope! Edison was a dreamer and we can thank him for alot of the things we have now a days, this thread is what makes peaple dream of bigger and better things take skids for examp;e this wait has pushed him to make his own design and if i knew how to do something like t...

camelott112

yeah the tbar crank already puts stress on them so no go for me

camelott112

yeah i almost have to i mean the kickers peak at about 1000 watts and the alpines peak at 3000 watts yeah thats right they can handle a peak of 3grand so im running 1 to each sub to give it the power it needs and a 4 channel to my components this may be the biggest system i have ever run but itll be...

camelott112

haha well i kinda took that idea from paul jr on occ and jesse james on monster chopper its better than using the actual metal beform knowing how its gonna fit and bend and everhything else

camelott112

as we say around here...will can do ill get the rest mocked up and if you want ill even send you a high tech cardboard template foe the skid/ winch mount

camelott112

the only problem with the o.r.t.i. is that you cant buy them so i figured that i would jsut build mine let me know if you can weld ill send you dimensions it would be way cheaper than buying from me

camelott112

well i already had the alpines and i have been running them but i got a kicker 15 and it sounds incredible so instead of take out my alpines i just figured i would add the kickers

camelott112

still would be a sweet little setup 2 in body 2 in sus and some cutouts with some mean as crap tires on there... oh yeah

camelott112

i know that i have done alot of "talking about the system" that is going into penee but i figured i would get some visual up here i have to wait a few more weeks to lay the fiberglass but with the prerunner in the works i cant do it now anyways but here are the pics of the subs i have waiting for th...

camelott112

im using 1.25 inch tube on the bottom and 2.5 on the center and top the mounts go on the top bumper mounts and the bottom mounts intergrate with the bottom tow hooks i havent fabbed the center yet because i want it to fit a haudralic winch from mile marker but when all is said and done it should tur...

camelott112

thats a darn nice looking lift and the price isnt too bad wither let me check out my local shop and see what they say i may be doing that with the 2 inch body with the new 31's on i dont know if i want to go 6 inch yet and have to spend another grand on tires

camelott112

well im making mine right now its a little tricky but when i get it done i may do one or two more but its gonna be about the same price of a bully bar if somebody wanted one

camelott112

hey hj can you find a pic and are these gonna fit on our crews?

S-10CREWCAB.NET

Search found 242 matches

Fiberglass?

APC Racing Seats

Loud rattle