S-10CREWCAB.NET

KCustom

here is a shot of the the upper back and the mounting.....

KCustom

I have added a new computer controler for the amps....

KCustom

I am running the Volant CAI on my truck with a 2"BL, but my intake system is a little different with the supercharger....I would still think that the Volant would work just fine......

KCustom

babies truly are little wonders.....Congrats!!!!!!!!!!!!!

KCustom

I have 3.73 with a factory locking diff.

KCustom

I can not imagine why a shop would not put on both......On the gears, I am going to go to 4.56.....It will be after the first of the year before I can swing it....

KCustom

I woudl say 32".........if you want to really get out and pound the truck. 33" if you want to look good and do some wheeling.....Take a look at Hoses turck on the site I believe he is drining 31.5s and is moving around the suspension pretty good....With cut-outs and the SL You could easly run 33" an...

KCustom

If you want the lift and can get a good deal through your local dealer, I would go for it. My local dealer does not discount anything and I am not to keen on them even though they do good work.

KCustom

here are some shots of the truck and the built in Boost gauge in the center console... http://www.s-10crewcab.com/coppermine/albums/userpics/10039/site24.jpg http://www.s-10crewcab.com/coppermine/albums/userpics/10039/site25.jpg http://www.s-10crewcab.com/coppermine/albums/userpics/10039/site23.jpg

KCustom

I just got off the phone...As stated before the kits are built and are being powder coated as we speak. I also found out that the optional stainless skid plates are being cut and will be avaliable at the same time. The date fror avalibility is still Oct.19th........

KCustom

I do not who is answering the phone at Superlift but I have spoken with the folks in the engineering dept (Mike M. the head engineer) and they tell me the kits are built and are being power coated....I will call Dave who is in the sales dept tomorrow and get this cleared up............

KCustom

There is a Group Purchace going on with a really good discount on the new kit.....here is the thread.....

http://www.s-10crewcab.com/phpBB2/viewtopic.php?t=2099

KCustom

Coda..The SL kits are built and are being power coated as we speak...If you want one I would get in on the GP....

KCustom

I am pretty sure that Waren has scraped his IFS for a SFA (riped out the front end and put in a solid axle.......

KCustom

Thanks alot Henry.....it is so worth it, I never would have guessed that being a dad could be better than building cool vehicles......but IT IS!!!!!!!!!

KCustom

I still have room for two passangers or one and a baby seat....Mom said no matter what a baby seat has to fit!!!

KCustom

I believe that the truck belongs to a Service manager for the GMC or Chevy dealer in Ruston......

KCustom

Yes, the kit that was done on Hoss's truck is a pre-production kit....the jigs are complete from what I am told and the kits are being built as we speak......there has been a third truck that the kit has been put on that is not on the forum as well.....

KCustom

Keep in mind that Mike M does work for Superlift....The kit is in production and will ship in a couple of weeks....Here is the quote from his post...... Superlift's new S-10-6" kit has been released for production. Parts should be arriving at dealers with the next 4-5 weeks. Superlift will be making...

KCustom

Mom and baby are doing great! I am still trying to learn how to get by with less sleep.....Thanks again.

KCustom

To turn the seats into buckets: Remove the seats, at this point it would be good to build the subwoofer enclosure as I did or somthing else that you have in mind. After instalation of the sub housing, strip the top seat cover and foam and reinstall the frame. mark the frame allowing one extra inch f...

KCustom

Here is the newest Crew Cab member...

KCustom

Just got mom home from the hosptital......Hope to get back in 2 weeks to finish the molds. I will update soon....

KCustom

would anyone be interested in a molded double 8 enclosure...I have a design done (been done for several months) It is designed for two Kicker CVRs' or will work with any round woofer that is less that 4.75" deep...

KCustom

first I want to say that I am honored and that I am very proud of you guys over there. We are very lucky to have people like you defending freedom and democracy....We will keep you in our prayers. Here are a couple of shots of the back. If you will send me your email address I will send you several ...

KCustom

Welcome to the site....

KCustom

Thanks....They are going to check my wife in on Monday if she has not gone into labor.

KCustom

Spilt this topic to keep the other on subject-HJ

My wife and I are expecting our first child on or before the 20th of the month. I am tring to get the molds adjusted and preped for tooling. I may be a little slower once the baby gets here...but I am making some progress.

KCustom

Thank you Henry for the help with the picture....

My pleasure -HJ

KCustom

Here is the post from Superlift..... "Superlift's new S-10-6" kit has been released for production. Parts should be arriving at dealers with the next 4-5 weeks. Superlift will be making a formal announcement any day now, but since I have been reading this site for the past few months, I thought I wo...

KCustom

My pinon seal went out at 30 k miles and I was driving on the highway. they replaced it and it went out in two days so they replaced the yoke and the seal and I have had no more problems....

KCustom

The tires are about 32.5 inches tall and 11 wide...they are called a 33 x 11 but the math says the above....I would think that you would need about 5 to 6 inches of lift or you would need 2 to 3 and cut the fenders....The picture was taken right after the 6 inch SL was installed....no t-bar crank or...

KCustom

I have tires and wheels if you are interested....Centerline AZTEC 17 x 8 4.5 back spacing and Goodyear Wrangler A/T 275/70 17 all five tires and wheels for $1000. I have over 1500 in them and they have less than 500 miles on the tires and the wheels have never been driven on.... http://www.s-10crewc...

KCustom

Thanks Mike....Superlift Rules!!!!!!!

KCustom

What release means is that it has been released to production.....

KCustom

I have been told that they will publish that it fits 95 thru 04....

KCustom

The kit is released as of friday.....I talked with the head engineer on friday and he told me that he was releasing the kit. I would expect a press release this week.....

KCustom

The plan is to mass produce these...I hope to have the rears for the reg and ext cab as well as the full size Chevy,Ford, and Dodge trucks....it just takes time. The flares are made from .250 ABS with a UV inhibitor (twice as thick as the others) along with hardware and instructions and templets. I...

KCustom

I used the Hush Mat because it look just like the Dynomat and it cost less. I used the foil back on the back wall and floor and the closed cell sheet on the inside of the door pannels. It works great and costs less....

KCustom

I hope to be able to finish out the molds in the next month and have them avalible in the next 60 days.....

KCustom

I used HUSHMAT...Worked great. Back wall, floors, door pannels and under the hood.....

KCustom

I am not sure about the name..Here is a shot of one side

KCustom

Pass side rear...All four proto-types are done!!!!!!!!!!

KCustom

I am hopefull that I will have these avaliable for sale in a Month or two...

KCustom

My friends Jimmy did the same thing at about 30K miles on the drivers side...

KCustom

Your truck looks great!!!!!:)

KCustom

I used the welt that came with the BW flares that I had.....I have been fiting the flares and then modify the mold until it fits properly. they go on much better than the BWs' IMO...I will probalbly source a welt to go on the edge of the flares because of the slight chatter from the CNC router so th...

KCustom

I have not had a chance to fit the fronts to a reg or ext cab yet but I will and I am going to build some for the rears of the reg S-trucks....

KCustom

Thanks.....I do have some wheels for sale...Centerline 17x8 with 4.5 backspacing. they are the AZTEC design. I have 5 of them....$100 each.
They are new only mounted tires for pictures and then replaced with the KMCs'

KCustom

I am running a 9" wide wheel with 5 inches of backspacing...is that why I don't?

KCustom

I had 4.11 in the rear and 4.10 in the front of my 95 Blazer....I was told the same theory...front pulls more.

KCustom

I love my Powerdyne....Helps a bunch....

KCustom

Here is a picture of the drivers rear...

KCustom

Went to the site and it seems to be gone....

KCustom

Welcome....

KCustom

I talked to SL last night and I was told less that one month...They are building kits as we speak and are hoping to be welding them in the next couple of days...they are suposed to have a press release on the dates any day now.

KCustom

I called SL on Friday to check on bushing for my steering stabilizer and they said that they were doing a press release on the kit.....There is going to be another very cool accessorie for our trucks shown SEMA show in November in addition to the skid plate and lift...I can not say what because they...

KCustom

Justin, Your drawings are great! I am not sure what I am going to do with the color yet...they will stay black until I come up with something for the graphics. They do not look bad being black with the other black accents on the truck....I would like to do some subtle flames or scalups but I am not ...

KCustom

The plan is to mass produce these...I hope to have the rears for the reg and ext cab as well as the full size Chevy,Ford, and Dodge trucks....it just takes time. The flares are made from .250 ABS with a UV inhibitor (twice as thick as the others) along with hardware and instructions and templets. I ...

KCustom

I cut and pop rivited the fenders for the pictures then came back and welded them up like I wanted....If you have a jig saw with a metal cutting blade and can tape and mark the fenders with a pattern, then drill and pop rivit someone should be able to install these. The front flares drop into place ...

KCustom

What are you attaching them with? The same cup-n-cap covers for poprivets that bushwacker uses? How much more room for bigger tires will these allow? Be sure to get some picks before you mount them , so we can get an idea for the cutting that needs to be done. I am using a Truss head sheet metal sc...

KCustom

other side...

KCustom

drivers front......

KCustom

Got the front flares pulled today...I will post pictures on Monday of them on the truck....

KCustom

Here are a couple of shots on how I mounted the ORI light bar to my GMC bumper....

KCustom

Here is picture of the subs in my crew...

KCustom

It took a little time but the bar mounts to the metal behind the cover...Just have to line it up and cut holes for the bar ends to go through...I will try to get you some pictures. The KC lights come with a pretty cool swithch that I put in the location that Henry showed in the pictrue. If you can g...

KCustom

Here is a link to a light bar....

http://shop.offroadwarehouse.com/index. ... tem=oriBar

KCustom

I really like my KC Slim lights......

KCustom

Looks like CAR AUDIO in October and Possibly Sport Truck in December or January.....

KCustom

I am hoping to have the front and rear mods completed this week and will finish up the custom flares for both. The rears in the picture are mods of the Bushwackers that I put on for the photo shoot for the Magazine that came earlier than I thought...did not want to put them on but had to. I will hav...

KCustom

I talked to Superlift today about the Kit release date...Everything is almost complete. They are finishing up on the instructions and are in production on the parts for the kits. They hope to have them shipping in a couple of weeks....

KCustom

I have a 02 Dodge Neon that I use to go to and from, about 30 MPG...

KCustom

I have a pop up that weighs about 2700 dry..I pulled it for the first time this weekend with the lift and tires. I did not have any problem. I am looking to get a travel trailer and I have been told that I will need eq bars. I did add the trailer brake controler and a seven point hookup. I pulled th...

KCustom

I put the charger on after the lift and 35s and it still made a nice difference. I hope to change the gears after the first of the year to 4.56s...

Search found 297 matches