S-10CREWCAB.NET

OrlandoSonomazr5

So my truck was in a minor front end collision a few months back and unfortunately due to funds and not wanting to spend 3k to have the front end rebuilt by some shop, I took on the task of replacing the Front core support and rebuilding the front end myself. Was a minor crash, mainly the damage was...

OrlandoSonomazr5

distributor never came out when changing the fuel injection system and it ran before. We have spark. It seems to be a fuel issue.

OrlandoSonomazr5

Replaced old CSPI Fuel Injection with the new style and now have a no start issue.

Can't win with this thing.

Anyone bored who can take some photos around the top of their motor for me. I have two nuts left and can't figure out where they go.

OrlandoSonomazr5

so compression checked revealed 210 across all 6 cylinders. I'm assuming a bit high from the the normal 180lbs from carbon buildup in the cylinders. But we did find that disconnecting cylinders 3 and 4 had absolutely no effect on the motor other wise meaning they are not forming combustion. Now for ...

OrlandoSonomazr5

So I tried an old trick called the Dollar bill trick and the results were unfortunate. It seems I have a possible stuck valve or possibly bent either seems the heads need to come off. Totally bummed about this, only had it for 6 months and I've dumped more money into this truck than my other 3 vehic...

OrlandoSonomazr5

Have checked for fuel pressure leaks and like I said gauge remains stable for well over an hour so no bleed off. Only possibility is if one of the poppet valves in the old fuel injection is having a issue. We checked all spark plug wires to make sure ignition pulse was constant and equal to every ot...

OrlandoSonomazr5

so my engine has a serious misfire only at idle up to about 3000rpm then runs good We've gone trough all the basics distributor, wires, plugs, cleaned maf, checked map and maf sensors. During fuel injector test your supposed to turn engine to on position get around 55lbs of fuel pressure and then it...

OrlandoSonomazr5

So my truck today started misfiring and thru a code, I've recently replaced the distributor about a month ago, new plugs about 6 months ago and new wires as of today. Still misfires and barely runs or wont run at idle - but rev it up past 3000 rpm everything smooths out. I'm thinking Ignition Coil.....

OrlandoSonomazr5

Ended up blowing out one of the Braided brake lines that goes from the master cylinder to the ABS distribution block. Noticed both lines had same issue which almost looked like a burn mark or maybe a severe pinch mark but nothing is in the way of those lines. Anyway trying to find replacements anyon...

OrlandoSonomazr5

if you buy it let us know. Just replaced mine with A/c Delco plastic bushing replacement.

OrlandoSonomazr5

Thanks!!!

OrlandoSonomazr5

Found the issue.

120,000miles has taken its toll on the Fuel Pump Its dead. Funny gave it a few hits with a shovel and she primed right up. So its either the connections or the pump. I'm just gonna replace with a delphi pump to escape the problem.

Thanks for the help again.

OrlandoSonomazr5

I recently had to change my battery as I found my truck dead last Saturday, I jumped it got it running and drove it quite a bit but eventually parked at work. When I went to leave work the battery was again dead, I looked at the battery and it was from 2007 (which I will say is great for a Walmart b...

OrlandoSonomazr5

Are you sure all OBD2 vehicles have 2 O2sensors one before and one after the cat?? Cause I've owned Nissan's and other Chevy's with strictly one after the manifold, but they were either turbo Japanese import or LS Vette motors, so I'm not sure if that plays a role in the dept we're discussing. That'...

OrlandoSonomazr5

how many o2 sensors are there I've been contemplating a Cat-delete to run some race fuel, but haven't looked to see if there is one before and after the cat or not.

OrlandoSonomazr5

I have a 2002/2003 with the cd player and tape player so I believe it was a double din. Either way the Pioneer AVH-X3600BHS fit Perfectly clean install with parts from crutchfield. Yes it sucks that you need to have your phone connected to use it it. But I've found once I connect my phone I don't ne...

OrlandoSonomazr5

Original owner was my mom so I have the window Decal from the dealership. Its definitely locked 3:73's, but its good to know the info straight forward

I've decided to keep my sonoma mostly stock and im building a Jeep XJ with a LS instead.

OrlandoSonomazr5

I have a Pioneer Headunit and run App Radio with all different apps from waze to Dash Command, its awesome. Only downfall is the iphone doesn't like to stay with the LTE connection via the wifi needed to run the OBD2 scanner. Sometimes wazes will run in the background and stay updated other times it...

OrlandoSonomazr5

So i've been trying to figure out this whole rear ZR2 axle swap thing

Right now I have a 3:73 rear end with locker. Does that say anything about my front diff. And do I will I still benefit from the zr2 axle swap which I believe is just wider correct?

OrlandoSonomazr5

This is a incredibly sad story that happened this past weekend at a frequently visited local wheeling site. A mother and her 1 year old child were killed by CO2 poisoning when the jeep they were in became stuck in mud for just a few minutes. So for all you wheelers out there, heed this warning If yo...

OrlandoSonomazr5

No none of the lights flash. And the only thing changes since was the radio.

OrlandoSonomazr5

yea i Figured along that lines. Just wanted to make sure there wasn't any weird glitches with sonoma. Thanks.

OrlandoSonomazr5

Anyone else ever experience a Problem with RPMs surging when Air Conditioning is turned on and at Idle. It almost wants to shut the truck off but then rebounds. I notice the timing goes way out of wack when it happens, the Distributor is new and its a bolt in style so no adjustment allowed. Any Idea...

OrlandoSonomazr5

Its a 2002. Yes I have all features of my radio, but I definitely lost the alarm. The key fob horn alert and security light come on but like I said if I leave the window down, lock it till horn beeps reach inside and slide up the lock and open the door I don't get my alarm anymore. Kind of a bummer,...

OrlandoSonomazr5

How do you like Torque? Does it it show you Oil Pressure? Thats the only PID I can't seem to display and the the trucks dash as a oil pressure gauge which I would hardly believe could be mechanical so the ECU has to be providing that info. Just can't seem to tap into it. still trying though.

OrlandoSonomazr5

Like in a previous post I stated I recently replaced my stock headunit with a Pioneer AVH-X3600bhs - Which I got from Crutchfield on a great deal including all installation parts and adapters. I also purchased the Iphone Video adapter which works with this headunit via A app called "App-radio" you c...

OrlandoSonomazr5

thanks for the info guys. guess ill stick to key adjustment and add a leaf. I don't trust the 2" shackles with the towing I do. and 31"/10.5"

OrlandoSonomazr5

will do

OrlandoSonomazr5

Ended up being the rear sub-Harness plug Completely corroded away on the female side for some reason. Off to the junkyard I go.

I'm very surprised it did not blow any of the rear fuses.

OrlandoSonomazr5

So I noticed yesterday my driver side brake light and turn signal went out. I immediately replaced the bulb and of course still didn't work. I got on the forum and searched and searched, and searched and found some answers but not one that fixes my problem. Diagnosis - Turn Signal/Brake light not wo...

OrlandoSonomazr5

yourkeysupplier is the sellers name. I have a 2002 sonoma so I got. programmed them in 2 mins no problems since.

2 NEW KEYLESS ENTRY REMOTE KEY FOB TRANSMITTER CLICKER KOBLEAR1XT 15042968

OrlandoSonomazr5

I was looking at the Rough Country 2.5 lift for the regular s10's and was wondering if that kit works on a CC. If not why. Or can anyone recommend a company that makes a good leveling kit that uses a additional leaf spring instead of a Shackle lift. I don't want to loose my towing capabilities, and ...

OrlandoSonomazr5

I got mine off Ebay I got two key Fobs and free shipping for $23. Best deal I could find.

OrlandoSonomazr5

Whats up guys new to forum. Seems like most the forum has gone extinct as many posts seem to be around 2013. I hope theres still a few of you around as I just got mine and I'm sure to have questions. The search function has obvisouly been my best friend but sometimes you just gotta ask. I have a 200...

OrlandoSonomazr5

just replaced mine last week, Its so nice to have great functioning Key fobs again!!!!

OrlandoSonomazr5

Hello all, Just installed a New pioneer Avh-3600bhs Head unit in my CC to get the Bluetooth functions, and this one has AppPlay which allows me to hook my iphone up to it and use apps like waze, maps, calendar, and other apps right on the head-unit which is, now that I've got it all working is freak...

OrlandoSonomazr5

well that was fun but that easy install. Needed to make a oil pump key out of the old distributor, but was done in a about 2hrs. Sure if I had to do it again it would take 20 mins.

OrlandoSonomazr5

Mine just suffered the same fate. Woke up this morning fired her up and heard this god awful noise I thought it was either a valve smashing a piston or a bearing letting go, till I put my hand on the distributor. After taking it apart it had almost 3/4" wobble to it. I'm On my way to pick up a richp...

OrlandoSonomazr5

Thats it Thanks.

Mine was my moms truck when it first happened, but what you're saying seems about right, that door seems to push more into the seal then that others.

Thanks again

OrlandoSonomazr5

Hello All new to the forum. Got a 2002 ZR5 here in ORlando, FL with some mods to come. Right now though i'm fixing the little stock things. There is a weatherstrip seal that runs along the top of the doors from the very corner of the door all the way to the back of of the crew cab. Mine has ripped o...

Search found 40 matches