S-10CREWCAB.NET

Bad_Ass_S10

yeah, for $500 you can have my 3.73 axles (front and rear) and you could swap them out yourself

complete axles - no internal part swaping - 28,000 miles on them

Bad_Ass_S10

I dont have any pics since I redid my computer but I will get the camera out this week and take a few pictures, the front cross member is home made with the front spring hangers and the "rear" front spring hangers are for an F250 super duty welded to the inside of the truck frame the steering is a c...

Bad_Ass_S10

try to find a wagoneer pre 84, they all had dana 44's and were manual lock out, if you see a dana 44 in a wagoneer but it does not have manual lockout hubs its either going to be vacuum activated or all wheel drive and you dont want that, abd watch out for the grand wagoneers as well here is some in...

Bad_Ass_S10

I have the same steering setup on my truck but done from the passenger side Steering arm ( acts more like an Idler arm ) instead of putting all the stress on the steering box, but its a good set up

Bad_Ass_S10

the new ford 6.0 deisel is nothing but problems, try to find an older truck with the 7.3 or you will be sorry, I heard that Ford will be discontinueing the 6.0 soon and looking for another to replace it, but as soon as dodge changes their body style, ford is going wiht the cummins since ford owns cu...

Bad_Ass_S10

well I have 4 12's in a blow through box in the bed, and have 4- 6 1/2 mids and 4- 3 3/4 tweeters, that sounds pretty good,

Bad_Ass_S10

I agree with HJ. the shackles will be fine, its only 600#'s not 2000 - 3000, that is when you need springs, you probably dont even see the rear scwat with that boat, the shackle will lift the truck up about 3/4 - 1 inch but still allow the spring to function like they do now, with an add-a-leaf it w...

Bad_Ass_S10

I have an add-a-leaf in the rear springs of my truck and you only gain the thickness of the spring ( about 3/4" ) but I have 4 12's in the bed of my truck and needed a little bit more from my springs due to the added weigh of the speakers and box, and have not had a bit of problems out of them, but ...

Bad_Ass_S10

Straight axle it, you wouldnt believe this but the money you spend on a IFS filt for your truck, you can straight axle it - I spent 2500 to do my truck ( not counting wheels and tires ) thats new springs, rebuild both Dana 44 axles, 4.88 gears,stainless steel brake lines,new/ longer drive shaft, u b...

Bad_Ass_S10

I have a 92 z71 for sale with a 350, but its been built with roller cam, hooker headers, 650 double pumper carb, 3000 stall converter, th400 tranny, 1 ton rear axle, 4.88 gears

Bad_Ass_S10

dude, if you really want 3.73, I have a set for you that came out of my rear end - well actually it the whole rear axle, rotors ( well everything ) for sale, its just sitting in my shed- I even have the front differential to match

Bad_Ass_S10

keep an eye out in mini truckin mag. , a photographer from them took many pictures at a recent show ( LNO show ) and got my info, plus I bet there will be a picture of me and a chick holding a rim from the set of 20's that I won in a raffle drawing at the same show

Bad_Ass_S10

thanks for the pic, but that font help me on how I can do it myself

Check out some posts in the information forum- How to post pics? ( instructions for posting pictures ) , Posting Pictures, Posting Images. -HJ

Bad_Ass_S10

I would post the pic. up on here but I dont know how too, but I sent it to you via email.

Bad_Ass_S10

has anyone heard of a tire company thats coming out with big tires for 24" rims, I know Nitto has 40x15.5x22's out now but my step brother said he just ordered a set of 38x15x24's to put on his truck but they wont be out for another 8 months ( he is a manager at a tire kingdom ) I have 39.5x15.5x20'...

Bad_Ass_S10

buy an extended warranty the next time you buy a new vehicle - that way you can take it to the dealer to get it fixed

Bad_Ass_S10

the baja are a good riding tire, I had a set of 39's and didnt even balance them when on my truck, my step-brother also has a set of 39x18 on his SFA 95 Tahoe, and tehy ride so good, and has put like 35k miles on them and still have alot of tread left, but he rotates them about every 3k. miles. I do...

Bad_Ass_S10

check out Mickey Thompson tires, if they make a 31 it will probably be a 30" in actual size, I had a set of 39.5 swampers and then bought 39" M/T and they are really not 39" tall - really about 38" but a classed as a 39"
then I got rid of them and went back to a STS 39.5x15x20

Bad_Ass_S10

kinda expensive, I bet you could get everything you need at a welding supply store for 1/2 that price, 4ga wire can be picked up anywhere, stereo shop or home depot, and may even have the plug at home depot, I have the same setup on my service truck, I have had that setup for about 2 yrs now, same e...

Bad_Ass_S10

check out http://www.hornblasters.com
they are a local company out of Tampa that sales train horns, most people are mounting this set up behind the grill, but train horns are played outdown here, like every other lowrider or big truck has them,

Bad_Ass_S10

K - do you accept paypal???

Bad_Ass_S10

could try http://www.dirtcheaprims.com or http://www.salesco.com

Bad_Ass_S10

you can count me in

Bad_Ass_S10

Well I just got my power back on and cable, and wanted to check in to see if all our other members that live in the so called "Sunshine State" are doing ok. I got hit pretty good, 4 trees in the back yard, 1 on the back porch and a 8" diameter branch hit my fullsize Z71, not too much damage to the C...

Bad_Ass_S10

sounds like thats a personal problem - haha, for real depending on what parts you need I may be able to sell you my old one, but I need the sleeve that fits over the output shaft

Bad_Ass_S10

I dont know about where you live but down here every other truck I pass has some lift to it , granted its not everyday you see an s10 lifted but fullsize trucks are everywhere and they dont have problems with tie rods comming apart

Bad_Ass_S10

any updates on how progress is going, or how soon they will be done?

Bad_Ass_S10

how much for a complete set - front and rear ????

Bad_Ass_S10

when will the flares be made available, I want a pair for my truck

Bad_Ass_S10

well from Aug. 1 thru Aug. 31 the gas is $.08 cheaper for gas in the state of Florida, some people ran a potition to the state commissioners and they passed a bill for all gas stations to lower the pfice of fuel $.08 for 1 month - I just filed up tonight and reg cost $1.77, plus $1.87 and pre. $1.97...

Bad_Ass_S10

Hate to say but all I have are gas hogs:
'01 cc on 39" tsl swampers - update now on 39" mickey's as of 7/29/04
'92 Z71 with a motor from a sprint car ( 400hp ) now on 39.5 tsl's from cc - before on 39" boggers
and my muddin toy, '76 ford f-150 with 390 big block on 40x17 ground hawgs

Bad_Ass_S10

does any ne know what the stock horsepower is at the rear wheels - has anyone put a cc on a dyno , I know that from factory the engine has 190 hp but thats before the tranny and rear end,

Bad_Ass_S10

if its gears or axles you need, I still have a front and rear with 3.73 and posi lock from the factory sitting in my shed out back

Bad_Ass_S10

I had that problem when I first bought my truck ( when it was still stock ) and my buddy is the service manager at a tire kingdom here and he checked my tires and the belts were seperating, so I took the truck back to the dealer and they fixed it, ( new tires ) plus there was a bubble on the sidewal...

Bad_Ass_S10

the shops around here ( Tampa Fl ) charge $350 labor for a body lift and $600 for a suspension lift, I dont know if thats a good price or not, but seems too me thats a lil steep, especially for the body lift, but what do I know, I do all my own work, not just to save $$$, plus I sleep better at nigh...

Bad_Ass_S10

depends on what kind of locker you are talking about, there is many to choose from so you can get many opinions, manual lockers pretty much stay locked up no matter what, you can get a selectable, electric, air, cable lockers too, I have a Dana trac-loc in the rear of my truck and its not a full loc...

Bad_Ass_S10

I would love to upgrade my brakes but I am still running 15" rims and barely have room for balancing weights on inside of the rims, no way I could upsize my rotors till I get larger rims

Bad_Ass_S10

all I can say is that I have never heard of anyone running propane in a gas engine but alot of the guys down here run it on their deisel pickups cause from what they say its just like adding NOS to a gas engine, but these guys have alot of work done to their engines too, exhaust brakes, exhaust temp...

Bad_Ass_S10

I dont know if this will help you out much but some others might find it helpful, I know i used it to verify what vehicles to look for the web site http://patooyee.com/ from there click on technical and the scroll down to you see the dana symbol and click on that from there you will be able find any...

Bad_Ass_S10

well it may be a lil late but I have a complete front and rear from my 2001 that has 3.73 gears and 28,000 miles and wanting to sell - right now the price is up in the air, and will ing to take offers

Bad_Ass_S10

I dont know it that kit is really suppose to use only a dana 30 basically from what I see that the kit is used with any coil sprung axle, and they used a dana 30 but I bet a dana 44 from a bronco would work the same, but thats what I think.

Bad_Ass_S10

Just want to see who all has a body lifts and what size, I know that 2" is the normal for our s-10 but does anyone have a 3" any pics would be great, I am debating on adding a body lift or not but dont want to if the frame is visible too much, I have looked at the recent pics of warn's truck and can...

Bad_Ass_S10

I try to find a straight edge of some sort to make a cut with plazma cutter, even if you burn the straight edge its better than trying to free hand cut, but when cutting curves, its a lil more tricky, I try to cut a lil extra and then go back and recut to the line (not trying to cut on line the firs...

Bad_Ass_S10

Just want to get an Idea of what different parts of the country are paying for gas:

Tampa Bay area avg.

reg. $ 1.87

plus $ 1.97

prem. $ 2.07

which is up 10 cent from a month ago.
and of course I run prem. in my truck with the ppIII

Bad_Ass_S10

26 here, with a lil 3 yr old girl

Bad_Ass_S10

what truck are you putting an 8" lift under???

Bad_Ass_S10

I second that, warn.

Bad_Ass_S10

try http://bds-suspension.com/

Bad_Ass_S10

if looking for a ford front end, just make sure its from an older one ( pre 94 - I think ) I almost picked one up from a 98 that rolled over and when I went to look at it I noticed that it was electonic/vacuum shifted meaning that I was going to need the electonic shift ( dash buttons ) and computer...

Bad_Ass_S10

not too many people may like this I dea, but its an idea, cut a hole from the bed to cab and build your box in the bed, any local topper dealer will have a rubber boot that can be cut and fitted to the cut through and you can run a beed of silicone around the edges to waterproof it, thats what I did...

Bad_Ass_S10

4 MA Audio 120xe subwoofers, MA602 high current amp (rated at 3600 watts), 2 sets of 6/12 MA Audio components, 4 MA 6 1/2 mid bass woofers, 2 4x6 MA Audio dash speakers, MA Audio HK597 amp for mids, MA HK297 amp for highs once I finish all my interior and fiberglass I will have pics, oh and I have a...

Bad_Ass_S10

the only thing with using 1/2 or 2/4 ton stuff is that you will have to find a specialist to narrow the 14 bolt, I will say that it will be alot stonger but by using dana 44 from a jeep you dont have to narrow or widen them, alot of guys are taking toyota trucks and running 44's and never have any p...

Bad_Ass_S10

going with a wider tire will help some but spacers are added to widen the rear end, by changing the offset of the rims would work too but would be a hassle to rotate the tires, you would have to unmount and remount each tire to a different rim so adding the spacers would be the most efficient way - ...

Bad_Ass_S10

what are the tires going to be used for? street of off-road - those tires dont look like they would do very good in mud/off-road conditions, the center tread would not clean themselves, if using for off road I would go with a swamper tsl or bf goodrich m/t - they clean out very well and ride good on...

Bad_Ass_S10

well I have a miller welder that cost just under 1300 but you need to make sure that the heat setting will be hot enough to burn into the frame, my setting goes up to # 6 and is a wire fed mig, I have never messed with tig welding but its one of the hardest types to master, a basic mig is probably t...

Bad_Ass_S10

I have a stampede also, I have had mine for about 2 yrs and already put a new engine and exhaust on but keep messing up the tranny - just dont run it 25mph and whip a 360 cause I have destoyed 2 trannys that way -

Bad_Ass_S10

IF interested, I can check to see what the rates for shipping will be - I think with my company we get a very good rate on shipping - we ship alot of heavy things all the time so I will go out and weigh all the parts and talk to our shippping handler,

Bad_Ass_S10

All depends on where buba is form - I am in Tampa, Fl

Bad_Ass_S10

Better yet, if you want the front too, I have it and will sell it all for a reasonable price - complete rear and front with 3.73 - you get from rotor to rotor

Bad_Ass_S10

you could look for a complete rear end that has 3.73 gears already with disc brakes and came from a crew cab - what ya know, I have one in the back yard with your name on it for the right $$$ - came from my 01 crew cab with 28000 miles , disc brake and 3.73 with that factory locker - if interested e...

Bad_Ass_S10

use goo gone - it works on everything else - glue, sap, anything sticky - can pick it up at any wal-mart - its a yellow color bottle - I have not used it on visors though - I dont know if it will stain the cloth - but thats about the best thing I have used to remove stickers from paint and plastic, ...

Bad_Ass_S10

4.56's is plenty - just buy the programmer to change setting on computer and you will be fine - plenty of power with proper shift points and still able to cruise highway speeds - I get about 250 miles per tank on highway - well I drove from tampa to daytona beach for spring break and only used 1/2 t...

Bad_Ass_S10

I was in Daytona this weekend (march 25 - 28 ) and I saw a crew cab, black with a 6" susp. and 2" body lift, I didnt geta chance to stop and talk to him but rode up beside him on the strip, We kinda exchanged mods while driving - I think it might have been one of the guys on here, and if so I want t...

Bad_Ass_S10

Yeah, I am looking for the large glass windows ( the ones that Roll down ) the small ones I aint too worried about.

Bad_Ass_S10

ok, thanks for the info,adrenalnjunky

Bad_Ass_S10

adrenalnjunky, you got it, its more a car show thing, I heard to have them custom cut would be $$$$$$$$ so i figured I would post here to see if anyone would be of some help,

Bad_Ass_S10

Does anyone know if there are windows for the rear doors that are not smoked, All i can find is smoked or factory tented windows. I need to find clear windows if possible, I have already called some local glass shops and everyone said the same thing that it was not an option so to find replacements ...

Bad_Ass_S10

I just finished building a box for my truck, but I wount fit behind the back seat - In an earlier post I said I was going for 4 12's well I did and they are in the bed and have cut throughs into the cab. and they get down, 4 MA Audio 12's and 1800 rms MA amp, but still need more power, but still sou...

Bad_Ass_S10

I plan on keep'n my s10 till its wore out or if some one offers me enough $$$ as is than I would have to let her go

Bad_Ass_S10

I would like to find one of those, If any one knows where I can get one let me know, I just checked ebay and nothing came up - searched for s10 crew cab monster truck, if someone knows a better search title post me a message , thanks

Bad_Ass_S10

havent used the micro tuner but the hpp III is the way to go - stock the 4.3 has 190 hp and with an intake, mass sensor from a camero, a hpIII, and a few other minor things you can push well over 200 - closer to 215 hp, a buddy with a 4.3 in his ext. s10 gave me the idea to run the air rade intake, ...

Bad_Ass_S10

i have the same piece but havent installed it, a buddy of mine noted to me that some places taht work with lastic can melt the clear cover off and instal the billet piece and remelt the covert back on but - i havent found a place to do it yet but would love to find a way to do it - i dont know about...

Bad_Ass_S10

I want aset but havent seen any that fit up to our rear fenders- well atleast 2001's i need to get a better look at the newer trucks and see if the rear fenders are differnent or not but looking at a ext. cab or reg cab truck, the rear fenders wouldnt work due to the body lines on the rear fenders a...

Bad_Ass_S10

I dont have electric fan on my s10 but am running 2 electric fans on my full-size that has a 350 built and runs just fine although i am using the biggest rad. that gm offers but i need the it - i have a race car engine in my truck but with a few differences - i built it for power and lots of torque,...

Bad_Ass_S10

well - I have my 4 12's and ready to start building my box for them which I plan on doing this weekend and running about 1800 rms to them which should turn out to be pretty loud, a buddy that works at devine sounds ( a stereo shop here in tampa that is ranked DB drag ) is designing my box and all I ...

S-10CREWCAB.NET

Search found 104 matches

24's

"Sunshine state"

horsepower at rear wheels

Body Lifts ???

Gas prices ???

Crew Cab Lifted

rear windows/doors