S-10CREWCAB.NET

Nice pics...thanks, i was just thinking i would like to see a side by side shot


Loxley, huh? I grew up just north of there out in the country, little place called Pine Grove, just south of Bay Minette.

Nice rig. Im thinking of doing the BL first, and see how i like things, and go from there. I really like how Blaze's blazer looks. So im probably going to try and replicate that, but with AT's not MT's,Although I love the way the MT's look.

Thanks Guys..... Riceburner, your rub was on the frame or fender ? In looking for wheels, i like to keep stockish wheels from another model, i found the zq8 wheels. 16x8 with bs of 4.33. thought of running 245/75r16. Any ideas if this would be an issue with the MML? my ride is a DD with no offoading...

So your running just a t-bar crank to max z-height and rear shackles? No rubbing issues?

Looking to finally lift my truck and noticed the RC 2.5" lift. My thoughts were adding this to the MML. The normal MML only lifts the front 1.5" correct? So if this is acceptable and then add dropping the diff 1", you can get a 2.5" lift while maintaining the same cv angle as the MML t-bar crank. co...

Thanks. I finally got it out. There was , what i call an alignment plate that aligns the starter with the fly wheel. it was held on by 2 10mm bolts. once that was off the starter almost fell out. Just needed more light to see what was in there.

OK please dont flame me for asking yet another starter removal question. Ive search but havent found what i need. I have removed the wires and the bolts, yet i can not get it to come out. Just not enough room, i loosened the rear tranny bolts, and i think i removed the front engine mount through bol...

Thanks HJ, i did as you suggested and now find that my starter is no good. Rap on it while the key is turned, she fires over. so now i know what it is. Thanks.

2003 s10 CC 4wd 4.3l, been having problems not wanting to start now it won't start at all. Only code I get is a u1041, other codes I had were for an air sensor and O2 sensor. I've done some searching and will make sure the ground to the ebcm is good at g110. Any thing else I can check before I haul ...

Thanks HJ. That makes me feel better.

HenryJ wrote:Sounds like you are describing the Skidz cuts?

Yes sir, that wa the skid cuts i was referring to.

My biggest fear or hurdle is I don't want to cut my rig. Just because of screwing it up. But I thought if I needed to cut , what do you think of hiding the cut with a may flap that is fitted, and has a lip that runs up the side of the truck. I figure if it needs to be cut the front is the only place...

Well finally the wife comes to me and says, you need new tires, so now would be a good time to get your lift. :shock: I said yes ma'am. I only want my truck to look like a truck. I would like to be able to run 31x10.5. Only because the sheer amount of tire makes for this size. So my searching has pr...

But doesnt this mod disable the airbags?

If so then this mod is going to work for me.

I know this may be digging up an old thread but I thought it best to be put here. How much does the tow/haul help? I have towed my Massey Ferguson 135 tractor with a bushhog and boxblade, on a tandem axle 16' trailer and my CC had no problem shifting or keeping the gears below 55. Above 55 is where ...

Actually i would like the best sound with the best perfromance.

Can I have my cake and icecream?

I know some have said a 3" cat back with a free flowing muffler is the sweet spot for our trucks. But i was cruising ebay and saw some kits with duals with 2.25" pipes. What is the difference? i know this sounds strange but i have never changed an exhaust on any of my vehicles, and i my lack of exha...

thanks on the heads up about the direction. Ididnt even thank of that.

Tire rack list geolander mt plus

http://www.tirerack.com/tires/tires.jsp ... mpare1=yes


I didnt know if these were the same or comparable?

Got any other pics with the geo's and bushwackers? I really like that look since my truck is that same color and same wheels.

The geolanders measure 30.6 and you had no rubbing issues ? Or had you already added the spacers?

Hj, did you have the skids when you ran the geolanders? F9k9, i have all the tools to do and have used them before just not on my truck :shock: I thought of doing the skids and then rhino line the fender and the lower part of the truck but dont know how that would look. I didnt have a curb but i did...

Jongo how did you secure the cuts? Did you paint your truck after?

I figured without the cuts it would be either a small 31x10.5 or a large or true to size 30x9.5. A true 30 would give me an inch more lift, right? or from where I am at right now 1.25" roughly, then add the bl and tbcrank and the truck should sit 4.75 inches higher roughly, correct. It sure would be...

Sorry HJ, the 28.4 was used as an example. My tires actual measure is 27.4. My tires have about 20k miles on them and they are 50k mile tires. So they have gone trough less than have the tread. If my tires measure 27.4 and add the used tread of .5" , that gives me a new tire measurement of 27.9. Is ...

When a tire is listed as a size, then it gives the actual diameter, is this diamater while on the rim and truck or off? The reason I ask is I know a 235/75/r15 should be about 29" un diameter, while actual diamter is more like 28.4". I measured my 235/75r15 pn my truck with the proper amount of air ...

Thanks, i was looking at running the 33x9.5. so the back would need to be done as well.

jongo88, did you do the skid cuts on the rear as well?

Got pics? My crew has the small stock fender flare on the rear. I wouldnt mind modding those but i want some that are black . I wouldnt mind the challenge of the bushwacker flares. When you speak of the thinness? Are you speaking off the actual material thickness, or what? I know you said these flar...

Hj, thanks.

The f150 flares would this be all 4? Also is there something special about the 97 year? I have a 2000 expedition i could take measurenents off.

Neil

Hello, I am new here. I have a bone stock '03cc that I would like to mod with flares and the MML. While researching, i saw one member had done the skid flare cuts to his stock fender flares. Would anyone think this could be possible with the Bushwacker fenders? I know it may take a little body work ...