Search found 351 matches
- Mon Aug 11, 2014 10:02 pm
- Forum: Classifieds
- Topic: FS: Skidz Cut Out Flares
- Replies: 6
- Views: 2824
FS: Skidz Cut Out Flares
Hey guys I'm going to be selling the CC soon and figured I'd pass along these flares to someone else that will appreciate them! The fronts were never installed, and the rears were installed for about 2 weeks. I bought them thinking I needed tire coverage for passing inspections but I didn't need em....
- Tue Oct 22, 2013 11:12 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil pan gasket, rear main seal question
- Replies: 6
- Views: 1560
Re: Oil pan gasket, rear main seal question
i thought my rear main was leaking, turned out to be the pressure sensor leaking down the back of the block
- Sun Oct 20, 2013 3:44 pm
- Forum: Tires / Lifts / Suspension
- Topic: Look what i did this weekend!
- Replies: 33
- Views: 11429
Re: Look what i did this weekend!
Reed- I can show a picture of them sitting in my shed haha I only had them on for about 2 weeks till i took them off because i bounced them off a few trees and did not want to break them! But they are going back on before I ship my truck back to the states. Stucky- I currently do not have a front ax...
- Fri Oct 04, 2013 5:15 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Inconsistent Overheating Issue
- Replies: 6
- Views: 1023
Re: Inconsistent Overheating Issue
well almost a full container of 50/50 coolant and a good burp fixed her. I checked all around the intake with a mirror when i had the throttle body off one time and didnt see any signs of leaking. My oil fill cap does have a few drops of moister on it here recently, but even if i have a minor leak I...
- Tue Oct 01, 2013 12:26 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Inconsistent Overheating Issue
- Replies: 6
- Views: 1023
Re: Inconsistent Overheating Issue
t stat and rad cap was replaced montha go with both rad hoses, acdelco 190* fail safe tstat, rad cap with a spring loaded venting cap. went and check to day when i woke up. dip stick oil is good, just normal color. Over flow tank was just barely filled. rad cap was loose, and the rad was low, couldn...
- Mon Sep 30, 2013 9:41 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Inconsistent Overheating Issue
- Replies: 6
- Views: 1023
Inconsistent Overheating Issue
So I was driving my truck to work today after getting home from a 3 week long military trip. Before I left I had no issue when driving the truck, even when going for 3+ hours playing in the mud and dirt roads. Anyways I drove to work and noticed my my hot air turned to cold air, Check and saw the te...
- Sat Sep 07, 2013 3:45 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: 2002 S10 Vortec V8 Swap Build.
- Replies: 75
- Views: 21204
Re: 2002 S10 Vortec V8 Swap Build.
glad to hear it man! Makes me jealous I have to wait a few more months till i move to do it haha
- Sat Sep 07, 2013 7:48 am
- Forum: Tires / Lifts / Suspension
- Topic: 6" RC lift
- Replies: 5
- Views: 2845
Re: 6" RC lift
once again i go back to my first post, they are exactly the same!!
- Mon Sep 02, 2013 6:43 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: 2002 S10 Vortec V8 Swap Build.
- Replies: 75
- Views: 21204
Re: 2002 S10 Vortec V8 Swap Build.
i might of missed it by skimming quick, but are you re-pinning the stock harness or splicing in a donor v8 harness?
- Tue Aug 27, 2013 1:57 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: 2002 S10 Vortec V8 Swap Build.
- Replies: 75
- Views: 21204
Re: 2002 S10 Vortec V8 Swap Build.
any worries about the little 2.8 mounts holding up to the 350? Does the steering shaft interfere with the headers with the body lift, i know the website says it might? and what was the mod to the fuel spider, i know the stocks ones dont offer much performance.
Thanks bud!
Thanks bud!
- Tue Aug 13, 2013 12:44 pm
- Forum: Stock Crew Cab
- Topic: Plastic trim on bumpers, how to remove?
- Replies: 3
- Views: 2451
Re: Plastic trim on bumpers, how to remove?
i just used a big flat head to pry the clips off.
- Sun Aug 11, 2013 6:48 pm
- Forum: Tires / Lifts / Suspension
- Topic: Look what i did this weekend!
- Replies: 33
- Views: 11429
Re: Look what i did this weekend!
Yes dang MOT inspection was a pain in the butt!
But no real updates, other than Ive been riving it daily and abusing it every weekend.
I leave england to come back to a base in the states in a few months, when I do the truck is getting a dana 60, 14 bolt full float and 37's. oh plus a v8!!
But no real updates, other than Ive been riving it daily and abusing it every weekend.
I leave england to come back to a base in the states in a few months, when I do the truck is getting a dana 60, 14 bolt full float and 37's. oh plus a v8!!
- Sun Aug 11, 2013 6:44 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: 2002 S10 Vortec V8 Swap Build.
- Replies: 75
- Views: 21204
Re: 2002 S10 Vortec V8 Swap Build.
nice thing about when i do my swap is......no IFS crap in the way!! haha
- Sun Aug 11, 2013 6:43 pm
- Forum: Tires / Lifts / Suspension
- Topic: 6" RC lift
- Replies: 5
- Views: 2845
Re: 6" RC lift
itll fit. the suspension is exactly the same as a regualr s10. the ZR2 is the only one with a suspension difference
- Sun Aug 11, 2013 6:42 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil Pressure woes
- Replies: 12
- Views: 1815
Re: Oil Pressure woes
So I pulled the pressure sensor, it was leaking out the back of the sensor where the plug goes. Put in a new ACDelco sensor and so far oil pressure is back to normal, idles at 20psi and goes to 40 under load.
Im guessing a seal inside the sensor went out causing it to leak out of the back
Im guessing a seal inside the sensor went out causing it to leak out of the back
- Mon Jul 29, 2013 10:17 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil Pressure woes
- Replies: 12
- Views: 1815
Re: Oil Pressure woes
yes, from what I researched it cuts out the fuel pump relay at pressure below 4psi
- Mon Jul 29, 2013 3:08 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil Pressure woes
- Replies: 12
- Views: 1815
Re: Oil Pressure woes
not yet. I had to work this weekend so my truck actually went to a mechanics shop for the pressure test. they said to change the, which i already ordered. so im just waiting for that to get here.
Any advice or tipsfor changing one out? I know its behind/below the distributor
Any advice or tipsfor changing one out? I know its behind/below the distributor
- Thu Jul 25, 2013 2:59 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: 2002 S10 Vortec V8 Swap Build.
- Replies: 75
- Views: 21204
- Thu Jul 25, 2013 2:55 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: 2002 S10 Vortec V8 Swap Build.
- Replies: 75
- Views: 21204
Re: 2002 S10 Vortec V8 Swap Build.
sorry for the bad info, the h3 pan is for ls engines. but i know you can use the stock 350 pan if you have a body lift because you can make the engien sit a bit higher. If not there are a few 4x4 s10 v8 swap oil pans made to clear the diff n xmemeber. also here is a link for info on moding your own ...
- Wed Jul 24, 2013 9:59 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: 2002 S10 Vortec V8 Swap Build.
- Replies: 75
- Views: 21204
Re: 2002 S10 Vortec V8 Swap Build.
i read on s10forum about people using hummer h3 pans to clear the diff n crossmembr. Im looking foward to this, keep posting the info!! I have been researching and plan on doing the 350 vortec swap once i get back to the states in a few months
- Wed Jul 24, 2013 9:55 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil Pressure woes
- Replies: 12
- Views: 1815
Re: Oil Pressure woes
Havent checked yet, but thats a good idea. I already ordered a new sensor even though im not pressure checking it till friday. Depending on what the pressure check says and if the new sensors fixes anything, i might change up the oil to a 10w-30 or 5w-40 and see if the thicker oil helps at all. From...
- Wed Jul 24, 2013 4:50 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil Pressure woes
- Replies: 12
- Views: 1815
Re: Oil Pressure woes
the truck is going to get pressure tetsed with a mech gauge on friday. I hope it is the sensor or maybe the gauge motor as the gm dashes are known to fail. I really really hope i am not heading towards a rebuild at onl 160,000
- Tue Jul 23, 2013 6:48 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil Pressure woes
- Replies: 12
- Views: 1815
Re: Oil Pressure woes
also the oil was only a month old, no shavings or glitter. just little black sludge particles ont he last few drops. So the lack of metal in the oil makes me think it is not bearings (either main or cam)
- Tue Jul 23, 2013 5:59 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Oil Pressure woes
- Replies: 12
- Views: 1815
Oil Pressure woes
Ok guys so '02 s10 4.3, 160,000 mi. Normally at 190* it will idle around 600 with 25-30psi oil pressure and climb to around 40-45ish while driving. Ive had a slight lifter tick for the last 10,000 or so but it has never gotten worse. Today while driving it dropped to around 2-10psi at idle warm, set...
- Tue Jul 23, 2013 5:59 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Bank 1 & 2 Lean Codes
- Replies: 3
- Views: 1024
Re: Bank 1 & 2 Lean Codes
found the EGR return line to the intake popped off and replaced the up stream 02 sensor right before that. no code now for a week!
- Sat Jul 20, 2013 12:35 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: 4 wheel drive not working
- Replies: 10
- Views: 1994
Re: 4 wheel drive not working
the most common thing for the 4x4 not working is the vacum thing under the batter tray not holding the vacume.
- Sun Jun 30, 2013 12:04 pm
- Forum: Classifieds
- Topic: Goin SFA - Tons of IFS, 4x4, & ZR2 Goodies!
- Replies: 19
- Views: 6005
Re: Goin SFA - Tons of IFS, 4x4, & ZR2 Goodies!
HJ hit it on the head. my 373 are not bad, i just need to get the computer returned for the bigger tires so the tranny stops "searching" for gears on the highway. but i think 410's would give it a little more balls off a start
- Thu Jun 27, 2013 4:09 am
- Forum: Classifieds
- Topic: Goin SFA - Tons of IFS, 4x4, & ZR2 Goodies!
- Replies: 19
- Views: 6005
Re: Goin SFA - Tons of IFS, 4x4, & ZR2 Goodies!
not sure if you know but all waggy d44's are LP. Dana 30's are cheap but i would stay away from getting one, if you do go for a '96 or new xj d30. it has the bigger ujoints and the 1 piece passanger axle shaft.
Hit me up for SFA info if you need, ill share the wisdom.
/end of thread jack haha
Hit me up for SFA info if you need, ill share the wisdom.
/end of thread jack haha
- Thu Jun 20, 2013 5:18 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Bank 1 & 2 Lean Codes
- Replies: 3
- Views: 1024
Bank 1 & 2 Lean Codes
Truck threw both lean codes the other day. Reset them and it came back on a day later so Im thinking MAF, fuel pump/filter, O2 sensors, vacum leak? I replaced the O2 after the cat a year ago, and have a fuel filter i need to throw in it. Gonna give the MAF a clean and see if it helps. Anything I sho...
- Thu Apr 25, 2013 3:10 pm
- Forum: Stock Electrical / Audio / Lighting
- Topic: Metal box behind dash at heater controls
- Replies: 2
- Views: 1788
Metal box behind dash at heater controls
Hey not sure if this is in the right section or not but Im looking to mount a CB radio where the ash tray is in my '02 s10. I removed the ash tray and right above it, behind where the heater controls are, is a metal box. What is it, because I was thinking of drilling into it to mount the CB mount bu...
- Thu Apr 18, 2013 1:02 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
get a vortec 5.7 from '96-'00 and the swap is considerably easier than other v8 swaps
- Tue Apr 16, 2013 12:59 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
looks like lords walk behind base haha. truck looks good!jpturner928 wrote:THis is what the truck looked like the First time I owned it while I was in England.
- Sun Apr 14, 2013 12:57 pm
- Forum: Crew Cab Modifications
- Topic: ECU Tuning
- Replies: 5
- Views: 2719
Re: ECU Tuning
Most used a programmer to correct the speedometer. Adjusting the shift point helped mine too. I know that it is only designed for WOT, but I did have success. The Corvette servo, billet fourth and longer pin are another thing that I and a couple others did. I also added a switch to unlock the conve...
- Sun Apr 14, 2013 12:50 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
yea with the solid axle I have to mod the tranny xmember and left side of the ypipe to clear the dshaft
- Sun Apr 14, 2013 4:12 am
- Forum: Tires / Lifts / Suspension
- Topic: Look what i did this weekend!
- Replies: 33
- Views: 11429
Re: Look what i did this weekend!
Hey yall, its been forever since i updated this. I had to fight the struct UK inspection laws the past 3 months. They dont like custom vehicles over here too much. So since the last update i switched the pitman arm from an XJ to an YJ, theres about a 2" drop difference between the two. The XJ was hi...
- Sun Apr 14, 2013 3:59 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
Flexed the truck out for the first time
http://i407.photobucket.com/albums/pp15 ... b44e51.jpg
and also managed to get it stuck haha not having a front driveshaft sucks
http://i407.photobucket.com/albums/pp15 ... 72eaea.jpg
http://i407.photobucket.com/albums/pp15 ... b44e51.jpg
and also managed to get it stuck haha not having a front driveshaft sucks
http://i407.photobucket.com/albums/pp15 ... 72eaea.jpg
- Sun Apr 14, 2013 3:55 am
- Forum: Crew Cab Modifications
- Topic: ECU Tuning
- Replies: 5
- Views: 2719
ECU Tuning
How many of you retuned/reflashed you ECU after putting on 33's. My truck seems to "search" for a gear while on the hihgway.
- Wed Apr 10, 2013 12:32 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
Im liking it, been here over 2yrs now. Not sure where you worked but Im a crew chief. and it looks like someone had a friend in sheet metal that made the tool box hahajpturner928 wrote:Not anymore I came back in 08. I was at lakenheath in 04 to 08 with mine. How you likeing it there?
- Mon Apr 08, 2013 12:13 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
You have your CC over inengladn too?jpturner928 wrote:Switch additions when I took the truck over to England.
I got mine over here with me haha its odd at first driving over here with it
- Mon Apr 08, 2013 12:14 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
yea there built solid! and if your a s10 forum member theres a discount from that compnay for all the lights
- Sun Apr 07, 2013 2:49 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
yea it is, and that is only the single row of LED's.
heres the website if yall are interested : http://www.waylayedinc.com/Waylayed2010 ... ight-Bars/
heres the website if yall are interested : http://www.waylayedinc.com/Waylayed2010 ... ight-Bars/
- Fri Apr 05, 2013 4:23 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
mounted a 20" LED bar to the front!
http://www.facebook.com/photo.php?v=102 ... =3&theater
hopefully the video works
http://www.facebook.com/photo.php?v=102 ... =3&theater
hopefully the video works
- Mon Apr 01, 2013 6:07 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Parking brake woes
- Replies: 8
- Views: 1660
Re: Parking brake woes
my stock cables were worn threw the protective hosuing and rusted the internal cable. plus with going spring over in the rear and add a leaf it required me to use the ZR2 cables
- Sun Mar 31, 2013 8:25 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Parking brake woes
- Replies: 8
- Views: 1660
Re: Parking brake woes
no, brand new ZR2 cables in
- Thu Mar 28, 2013 10:02 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Parking brake woes
- Replies: 8
- Views: 1660
Re: Parking brake woes
ill look into that tool more, might have to get it for the future. But im trying to get the truck inspected next week other wise i go outside the window of the free retest after the intial fail. Ill see if i can make it work the old school way and then properly do it with the tool later. thanks for ...
- Thu Mar 28, 2013 3:31 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Parking brake woes
- Replies: 8
- Views: 1660
Re: Parking brake woes
yea ive seen those specs before, but im not going to drop $50-$80 on a tool i wont use often. So by doing it the old school way I should just adjsut it till it contants the rear drum right?
- Tue Mar 26, 2013 2:06 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Parking brake woes
- Replies: 8
- Views: 1660
Parking brake woes
Hey yall. Im trying to get my truck through inspection after the axle swap, but i cant get my ebrake to hold enough for the inspection test. I replaced the parking brake pads, and had to use longer ZR2 cables because of the rear being lifted. Im going to completely tear the ebrak system apart again ...
- Tue Jan 15, 2013 9:03 am
- Forum: Crew Cab Modifications
- Topic: Under construction CC
- Replies: 13
- Views: 4277
Re: Under construction CC
gotcha some serious rake there bud
- Sun Jan 13, 2013 8:43 am
- Forum: Crew Cab Modifications
- Topic: How To: S10 Hood Strut Install
- Replies: 9
- Views: 8370
Re: How To: S10 Hood Strut Install
ordering the parts for this monday when i get paid. ive been wanting to do this for awhile!
- Mon Jan 07, 2013 9:35 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: GoPro
- Replies: 13
- Views: 4974
Re: GoPro
let me know how you like it man. i have the original HDHero but been wanting to upgrade to the hero3
- Wed Dec 19, 2012 6:58 am
- Forum: Crew Cab Modifications
- Topic: ABS Delete/MC Swap How To
- Replies: 18
- Views: 8419
Re: ABS Delete/MC Swap How To
what is the fun in buying a rig already built? hahaRinkrat456 wrote:You can just buy my truck.
but seriously, thanks for all the info. Im going to have to look into it alot more. I might end up doing the mod before I swap axles.
- Sun Dec 16, 2012 3:22 am
- Forum: Crew Cab Modifications
- Topic: ABS Delete/MC Swap How To
- Replies: 18
- Views: 8419
Re: ABS Delete/MC Swap How To
wow i did not know that. i just assumed the bigger bore would make for more pressure. oh well, trial n error with solid axle swaps haha. yea man id love to hear about a hyroboost set up! im running a D30 & 33's right now. but once me n the truck get back in the ole USA i have plans for either 1/2ton...
- Fri Dec 14, 2012 6:29 pm
- Forum: Tires / Lifts / Suspension
- Topic: Front lifts that relocate the differential
- Replies: 11
- Views: 3845
Re: Front lifts that relocate the differential
if you go sfa your going to have no problems dropping in a v8 and you will have a suspenion that will hold the power. IFS with a v8 is crap
- Fri Dec 07, 2012 7:17 pm
- Forum: Classifieds
- Topic: Brake Parts F/S
- Replies: 6
- Views: 2588
Re: Brake Parts F/S
if no one shows interst in these by next friday there going on ebay.....
- Thu Dec 06, 2012 6:43 pm
- Forum: Classifieds
- Topic: Wanted: Skidz Fender Flares
- Replies: 17
- Views: 5390
Re: Wanted: Skidz Fender Flares
i tihnk i was actually the buyer of the last set, haha. but i just puled my flares off to do the skidz cuts, and it dont look half bad. its always a option you can try if you need the bigger wheel wells
- Thu Dec 06, 2012 4:18 pm
- Forum: Crew Cab Modifications
- Topic: ABS Delete/MC Swap How To
- Replies: 18
- Views: 8419
Re: ABS Delete/MC Swap How To
What about the ABS light?? I havent messed with that yet. read somewhere pulling the fuse for abs on the driver side dash fuse box fixes it. if not im going to pull the dash circuit board off and jump the positive side of the abs led to the check gauses light. that way everything lights up as norma...
- Wed Dec 05, 2012 8:27 pm
- Forum: Crew Cab Modifications
- Topic: ABS Delete/MC Swap How To
- Replies: 18
- Views: 8419
Re: ABS Delete/MC Swap How To
Thanks brule! did it in one day, next weekend im going to start the skidz flares, thanks to you sending those cut out templates!
- Wed Dec 05, 2012 8:24 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
i pulled teh tcase, tore it apart, replaced front splined output with a jeep yoke output, http://i407.photobucket.com/albums/pp159/topshot956/023-1.jpg wire brushed the frame, and primed n painted http://i407.photobucket.com/albums/pp159/topshot956/003-1.jpg and deleted my ABS http://i407.photobucke...
- Wed Dec 05, 2012 8:18 pm
- Forum: Tires / Lifts / Suspension
- Topic: Look what i did this weekend!
- Replies: 33
- Views: 11429
Re: Look what i did this weekend!
hey yall, its been awhile. slowly chipping at this thing, did the abs delete, scored a set of skidz flares, reworked my steering problem, changed out the bad unit bearing. now all i have to do is figure a way to reconnect my ebrake cable. but here is a current pic of her next to my buddies xj for he...
- Wed Dec 05, 2012 8:10 pm
- Forum: Crew Cab Modifications
- Topic: ABS Delete/MC Swap How To
- Replies: 18
- Views: 8419
ABS Delete/MC Swap How To
Hey guys heres the write up I promised. I did this master cylinder swap n ABS delete because of my solid axle swap. Im not going to go into detail on my swap, if you want to know more you can read my build thread. Anyways its a pretty straight forward swap. Now you could do this delete and keep the ...
- Wed Dec 05, 2012 10:32 am
- Forum: Classifieds
- Topic: Brake Parts F/S
- Replies: 6
- Views: 2588
Re: Brake Parts F/S
technically yes there coming from the uk where im stationed. but its military post from the uk to the us. the shipping cost isnt any different than it would be in the states. and i used a 80's 3/4ton chevy master because the stock MC wasnt enough to stop the truck after the solid axle swap. i dont h...
- Tue Dec 04, 2012 1:11 am
- Forum: Classifieds
- Topic: Brake Parts F/S
- Replies: 6
- Views: 2588
Re: Brake Parts F/S
I took pics along the way with the intention of doing a write up. ill post it on here in a few days man. part #'s n everything
- Sun Dec 02, 2012 5:00 pm
- Forum: Classifieds
- Topic: Brake Parts F/S
- Replies: 6
- Views: 2588
Brake Parts F/S
Hey yall. got around to doing the ABS delete on my CC. Well now i have a stock master cylinder, and stock ABS module just sitting on the work bench. So there up for sale. All parts form a '02 CC.... ABS module w/ bracket - $75 obo Stock master cylinder w/ reservoir - $20 obo Prices don't include shi...
- Sun Nov 25, 2012 4:08 pm
- Forum: Crew Cab Modifications
- Topic: Diesel swap into the crew
- Replies: 8
- Views: 3539
Re: Diesel swap into the crew
I wish there was a quick swap engine for these. there is, 350 from (dont quote me im not 100% sure) 96-01(?). everything from the 4.3 bolts/works on the 350. wire in the two extra injectors and retune the computer for a V8 flash. But now for the topic of diesels, 4bt are a common swap. diesels10 on...
- Wed Nov 07, 2012 8:46 am
- Forum: Tires / Lifts / Suspension
- Topic: Complete New Front End ( mostly)
- Replies: 44
- Views: 14354
Re:
Any advice on that Pitman change, seems a little cramped for access ? i cant vouch for doing it wiht the ifs in there, as i did mine during my solid axle swap. but for me it took two days of PB blaster then it took a big tractor trailer style puller, impact air gun, and a torch. and it still faught...
- Mon Oct 22, 2012 6:56 pm
- Forum: Tires / Lifts / Suspension
- Topic: Look what i did this weekend!
- Replies: 33
- Views: 11429
Re: Look what i did this weekend!
hey guys, sorry for the lack of updates. Trucks driveable. and i just scored a set of skidz flares brand new never installed. Ill try to get pics up tomorrow for everyone to drool over
- Fri Sep 28, 2012 8:11 am
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
F9K9, whered you get your tail light gaurds? ive looked everywhere but cant find any I purchased from "Doc" he was a member here. He deployed shortly after I purchased them. They are the "Rhino" brand. BTW. are you getting my PMs? roger that. I emailed your personal email a few days ago. take care ...
- Fri Sep 21, 2012 1:56 pm
- Forum: N.O.S. (Not Otherwise Specified)
- Topic: What did you do to your Crew today?
- Replies: 367
- Views: 222938
Re: What did you do to your Crew today?
F9K9, whered you get your tail light gaurds? ive looked everywhere but cant find any
- Mon Sep 17, 2012 8:34 am
- Forum: Stock Mechanical / Drivetrain
- Topic: Center link?
- Replies: 11
- Views: 1910
Re: Center link?
wish i would of seen this sooner. i just scrapped all my IFS stuff
- Sat Sep 15, 2012 1:58 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Chasing an ATF Leak
- Replies: 36
- Views: 8099
Re: Chasing an ATF Leak
lol. damn ducks
- Fri Sep 14, 2012 1:27 pm
- Forum: Stock Mechanical / Drivetrain
- Topic: Chasing an ATF Leak
- Replies: 36
- Views: 8099
Re: Chasing an ATF Leak
had the same issue. just as steve and brule said, its just overfill in the tranny making its way out
- Thu Sep 06, 2012 8:38 am
- Forum: Classifieds
- Topic: WTB: Flares
- Replies: 2
- Views: 1877
Re: WTB: Flares
good info. didnt know that
- Tue Sep 04, 2012 2:10 pm
- Forum: Classifieds
- Topic: WTB: Flares
- Replies: 2
- Views: 1877
WTB: Flares
Anyone have a set of ZR5 flares or old bushwackers or old skidz? Im in desperate need of tire coverage after my axle swap
- Sun Jun 17, 2012 2:15 pm
- Forum: Tires / Lifts / Suspension
- Topic: Look what i did this weekend!
- Replies: 33
- Views: 11429
Re: Look what i did this weekend!
everything is welded, shocks are on, all new fluids. Got one stuck caliper on the front d30 so im waiting to hit the junkyard tomorrow, and then i should be able to drive it
- Wed Jun 06, 2012 1:54 am
- Forum: Tires / Lifts / Suspension
- Topic: Look what i did this weekend!
- Replies: 33
- Views: 11429
Re: Look what i did this weekend!
heres a teaser till i sleep and get some more info/pics posted!
http://i407.photobucket.com/albums/pp15 ... 56/037.jpg
http://i407.photobucket.com/albums/pp15 ... 56/037.jpg