S-10CREWCAB.NET

Jeff

06/02 and mine locks

Jeff

Waterfowl, and archery deer hunting is all I live for. I have taken 3 nice deer this year, and been duck hunting 3 times so far this year, Limited all 3 times. Have only seen a few green heads so far this year. I hope this snow will push a few more down.

Illinois Hunter

Jeff

So far this year, a nice doe with my bow, and a really nice 10 pointer with my muzzle loader. I have pic's, but don't know how to put an immage on this site. Can anyone help? Both of them were taken on heavily hunted public ground.

Jeff

Here I sit in Southern Illinois, 2 days away from opening day. I have been scouting for months, shot my Matthews all year long, have numerous tree stands up on different pieces of ground, and can't wait untill Saturday

Jeff

My back seals are leaking a little bit right now, I wonder how hard they are to change?

Jeff

OK guys, maybe a stupid question, The CV joint on the drivers side does not leak, and has no play in it at the joint, but has movement in it where it slides into the pumpkin. I would say probably 1/16 of an inch up and down, side to side. passenger side is tight, very little movement. I have been no...

Jeff

Mine threw an SES light 2 weeks ago, when I checked it the error was a bad MAF sensor, I took it apart and hit it with some compressed air, replaced the filter, cleared the code, no more issues as of yet.

Jeff

69000 on original brakes, looked at them last week, they still have plenty of life in them. Just changed the wifes breaks, warped rotor

I put the wagner gold series on it. Ceramic compound. seem to stop nice, and dont seem to get as hot.

Jeff

Hey guys, I found a 96 S-10 regular cab 2 wheel drive last night in the salvage yard, both front and rear bumper looked good, will these fit our trucks? They looked the same, but it was getting dark, and I didnt have my truck with me. I didnt get a price because I wanted to make sure that it was the...

Jeff

Yes, what is happining is that it gets caught in the weather molding, and the safety clutch assembly starts to slip. If you play with the window molding a bit, it will work fine. I had fits with this untill I finally got the top of the window to quit catching on the weather molding.

Jeff

LINK Got my Bilsteins here for under $200

Linked long url-HJ[/url]

Jeff

Bilstiens at 60K... Love them, mayde a night and day difference in the way it rode, especially when pulling the boat.

Jeff

I will look this week since I have to go to look for vacuume actuators. We could meet in Northern Il. If I find any, I will be up in the Quad Cities this weekend...

Jeff

With all of the S-10's out there. I would try a boneyard.

Jeff

Well, so far, I have replaced the vacuume switch on the transfer case, did my best to make sure all of the trany fluid is out of the HVAC lines, replace the swelled seal at the selector switch, and things work better, but I still cant get the damper that blows in your face to completly shut. Does an...

Jeff

Well, so far, I have replaced the vacuume switch on the transfer case, did my best to make sure all of the trany fluid id out of the HVAC lines, replace the swelled seal at the selector switch, and things work better, but I still cant get the damper that blows in your face to completly shut. Does an...

Jeff

I have never let mine get past a quarter of a tank, but have gotten 25 miles per gallon, and as low as 17 mpg

Jeff

I'm running them and so far like like them, I have only done some minor wheeling with them so far, but am happy with them

Jeff

I am runnig the Bilstiens, and have never ran a better shock. I got them at eshocks.com best price I found. $239.00 delivered

Jeff

Replaced mine this weekend. $366.43 at cost thru one of my buddies, $504.23 for the average Joe cost thru the dealer. Prety easy to replace, but man did the cost hurt. Also the check valve on the vacum control was stuck open, and I had tranny fluid in my vacum lines. I hope that I can get all of the...

Jeff

Well finished installing all 4 about 10:00 last night. No need for the torsion bar unloading tool, just used one of my floor jacks under the lower A arm. They were not to bad to replace, Getting the rivets out of the lower ones was the hard part. Going in for an alignment today, hopefully no more fr...

Jeff

Folks, Although I have religiously greased all 11 grease points in my front end. During my last alignment, they showed me that there was some play in my lower ball joints, so now I am at the point where I have to replace them. I remember seeing a post on here for the steps to change them, but cant s...

Jeff

Steve,

Looks Great!!! Thanks for the before and after pics, I hope to use them to talk my wife into some more mods.

Once again,

Great Job

Jeff

Im actually thinking about building one if the price of aluminum and steel ever get back to reasonable prices. Even the price of Argon and helium for my welders has skyrocketed. I just got my 2 small tanks refilled, and it cost me $110.00 3 months ago it was $53.00

Jeff

Well per the good ol UPS tracking, the new shocks should be in tomorrow. I cant wait!!! Maybe I will be driving a truck instead of a ship on the rolling seas again.

Jeff

Hey guys,

Finally getting a chance to order my Bilsteins!!! I found them at eshocks.com for $239.00 shipped. Do you gus think that's a fair price?

Jeff

Hey folks, I need some help from the Guru's. My CC has been making a "gurgling sound" for awhile, this morning on the way to work, the heater control would not change from defrost to heat on the feet. I do my best to keep up on the posts and have a feeling that when I get the chance (this weekend), ...

Jeff

Sig Arms 9mm Stainless Tarus 12 ' barrel 44 mag Walther PPKS380 Ithika model 37 featherlite deerslayer Winchester model 1846 pump 22 rifle Ruger 22/250 (Bushnell scope) Thompson Center Black diamond XR 50 cal BP (simmons scope) CVA 50 cal BP Browning 20 gauge Stainless Ruger M77 308 (Redfield 5 star...

Jeff

Starting out, I was getting between 21 and 22 miles per gallon, bone stock, using synthetic oil and changing every 3,000 miles. I got to the point of getting about 14 to 15 mpg around 45,000 miles. I did a full tune up, cap, rotor, wires and plugs (Plugs were burnt bad) and am back to 21, 22 mpg.

Jeff

Well While I was changing the Anti freeze the other day, I decided to disconnect the battery and reset the computer. When I connected the battery back up, the 4 Hi began working again. No issues since.

Jeff

:twisted: Pulling my boat out of the ramp yesterday, it was muddy and the back tires started to slip. I figured that I would just put it into 4 high, and fix the issue. Pushed the button for 4 HI and nothing, the lights didnt blink, the transfer case, and the front end didnt engage. I put it in nutr...

Jeff

39, but I act 20 and feel 50

Jeff

I have an 02, and I was a little sceptical about purchasing an extended warranty. I haggled with the GM sales rep for a couple of days, and finally got to the point that he told me that he would buy back the extended warranty at the end of the warranty period if I had not used it, (6 years, 100,000 ...

Jeff

I wonder if it's an 03 thing?

Jeff

Well I checked last night, my door pannel switches are not illuminated, and dont look as if they were designed to be. of the people that are sure theirs do, what year and model are your trucks? I am trying to figure out why I got ripped on this option, it sure would come in handy at times.

Jeff

I dont think any of mine are

Jeff

Are you telling us that the switches on our doors are supposed to be illuminated?

Split the topic-HJ

Jeff

I would be more than willing to copy all of the data to my hard drive, put it on CD sets and send it out to each and everyone who wanted it on the web site, I just have not figured out how to get to all of the info in an easy mannor. If anyone has any ideas, let me know.

Jeff

Well bought mine in June of 02 and rolled 36K on it yesterday comming back from deer hunting in Iowa. :D No major issues as of yet, however i think thats because I read the forum, and do all of my own maintenance. I know for sure that all of the fittings in the front end are getting greased and that...

Jeff

Im getting about 20 to 21 also, I currently have 35,00 mi. on my 02, most of my driving is on the interstate, but i do my fair share of intown and city driving also.

Jeff

I have had mine on for over a year now, without any problems. Since I smoke, my window is always down. I found that if I roll my front window down about 3", and roll the back drivers side window down just a bit, there is no change in the cab as far as wind. There is no noticable difference in the so...

Jeff

Autozone was cheaper, if I remember right, I paid like $35.00 for all four of mine, and @& for the bug deflector.

Jeff

39K on my truck now. So far the filters that I have changed have been Air cleaner multiple times, trans filter twice, and the fuel filter once. the tranny and air filter locations are pretty much a no brainer , however it took me a few minutes to find the fuel filter. It is located on the frame reai...

Jeff

OK guys, I am finally at a point that I can order the spring kit, How much are they, and how do I order them. does anyone have any pics of them installed.

Thanks for any and all info.

Jeff

:D Ok guys, just ordered my set Friday. How long did it take for each of you to receive yours. I cant wait to get them. My wife got to drive my truck a few weeks ago for the first time, and hit a dog that ran out in front of her :( . It broke the cheap plastic skid plate in the front. I had started ...

Jeff

Here is one for ya 509 cid, and 509 HP. http://www.bosshoss.com/second.html

Jeff

Folks, My 02 CC has 30,000 on it now, and I am noticing that the tranny is not engaging like it is supposed to from a dead stop, it is like there is a lagg(step on gas, revs up, then kicks in) I changed the fluid and filter at 6K as recommended, checked the fluid the other day, although it was not b...

Jeff

I did a V8 swap on an 1982 S-10, went to a 400 small block. I was a pretty easy swap, and the most expensive part was the custom hooker headers, and the goodies that I put in internally. The one issue that I didnt have to work around was that it was a 2WD, there would have been quite a few more mods...

Jeff

Well Looks like Im the winner, or looser, however you look at it, I have a 19 year old son, a 14 year old daughter, two 11 year old daughters(not twins), and a 4 year old choclate lab, no wonder I have a hard time convincing the wife that I need more toys for the CC

Jeff

Now this is what Im talking about. My first S-10 was a 1982 (first American model year) the Isuzu 1.9 that was in it just wasnt working. I decided to build a 377 stroker for it (400 block, 350 crank and rods) after I finished building the engine, rebuilding the TH 350 trans, getting a new drive shaf...

Jeff

2002. 20,000 miles, changed to Mobile 1 an hour after pulling off of the dealers lot, no leaks, no problems, no complaints, no concerns. Just a good solid hard working truck.

Jeff

Not yet, I am making all of mine. I have a friend who has all of the stock ones, I am coppying them, just doing it in diamond plate.

Jeff

Too cool of an idea. I have been thinking the same thing about a factory hood, but maybe doing some louvere work to it. A buddy of mine has a new louvere machine and I have been dying to try it out. Let me know what you find for cost of hoods, I would like to get a ball park figure. I am into comple...

S-10CREWCAB.NET

Search found 53 matches

Success

CV joint question

HVAC issue

Ball Joints done

Ball Joint replacement

New shocks

HVAC Issue

4WD high range issue

Interior lights- door panel switches

Boise spring works leaf upgrade.

Tranny Issues